Distribution terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; screw-type and CAGE CLAMPconnection; 3 x CAGE CLAMP connection 10 mm²; 1 x screw-clamp connection 35 mm²; 10,00 mm²; gray.
The WAGO 284 series feed-through distribution terminal block is a gray, 1-deck unit with side marking slots, designed for a single feed-through pole and accommodating up to four wires (three clamps and one screw). It supports wire sizes from 0.2mm² to 10mm² or #24AWG to #8AWG, with a rated current of 125A. The terminal block features both CAGE CLAMP spring connections and screw-clamp connections, and is mounted on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 17.5mm. It is equivalent to the model 284621.
- actuation type:
- Operating tool
- approvals per:
- CSA
- clamping spring material:
- Chrome nickel spring steel (CrNi)
- color:
- Light gray
- conductor entry direction to mating direction:
- 0
- connection technology:
- CAGE CLAMP
- connector connection type:
- For conductor
- contact material:
- Copper alloy
- contact plating:
- Tin-plated
- contact type pluggable connector:
- Female connector/socket
- country of origin sales organisation germany:
- DE
- depth:
- 17.1 mm / 0.673 inch
- fine stranded conductor:
- 0.08 0.5 mm / 28 20 AWG
- fine stranded conductor with insulated ferrule:
- 0.25 0.34 mm
- fine stranded conductor with uninsulated ferrule:
- 0.25 0.34 mm
- fire load:
- 0.041 MJ
- flammability class per ul94:
- V0
- height:
- 11.8 mm / 0.465 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 2) Overvoltage category III / Pollution degree 2
- limit temperature range:
- -60 +100 C
- locking of plug in connection:
- Without
- material group:
- I
- mismating protection:
- Yes
- nominal voltage ii 2:
- 320 V
- nominal voltage iii 3:
- 100 V
- packaging type:
- Box
- pin spacing:
- 2.5 mm / 0.098 inch
- pole no:
- 5
- rated current:
- 0.25
- rated current csa use group b:
- 0.166666666666667
- rated current ul use group b:
- 0.166666666666667
- rated surge voltage ii 2:
- 2.5 kV
- rated surge voltage iii 2:
- 2.5 kV
- rated surge voltage iii 3:
- 2.5 kV
- rated voltage csa use group b:
- 150 V
- rated voltage iii 2:
- 160 V
- rated voltage ul use group b:
- 150 V
- ratings per:
- IEC/EN 60664-1
- safety information 1:
- The MCS MULTI CONNECTION SYSTEM includes connectors without breaking capacity in accordance with DIN EN 61984. When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure
- solid conductor:
- 0.08 0.5 mm / 28 20 AWG
- strip length:
- 5 6 mm / 0.2 0.24 inch
- weight:
- 2.245 g
- width:
- 14.6 mm / 0.574 inch
