Wago

WAGO 750-439/040-000

(No reviews yet) Write a Review
SKU:
750-439/040-000
MPN:
750-439/040-000
Condition:
New
color:
Blue
conformity marking:
CE
connection technology inputs outputs:
16 x CAGE CLAMP
connection type 1:
Inputs/outputs
contact resistance max:
1000
country of origin sales organisation germany:
DE
current carrying capacity power jumper contacts:
0.0416666666666667
depth:
67.8 mm / 2.669 inch
depth from upper edge of din rail:
60.6 mm / 2.386 inch
diagnostics:
Short circuit, wire break
dielectric strength:
510 VAC/775 VDC: per EN 60870-2-1
emc emission of interference:
Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3
emc immunity to interference:
Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
ex guideline:
EN/IEC 60079-0, -7, -11
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.25 2.5 mm / 24 14 AWG
fire load:
1.247 MJ
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
input characteristic:
High-side switching
input data width internal max:
16 bits
input filter digital:
3 ms
input pulse length:
5 ms
input pulse separation:
3 ms
intrinsic safety ex i:
Yes
isolation:
300 VAC system/field
marking:
ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc: II (1) D [Ex ia Da] IIIC: I (M1) [Ex ia Ma] I
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
note:
The digital input module must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 XTR manuals!
number of digital inputs:
8
number of incoming power jumper contacts:
2
number of outgoing power jumper contacts:
2
open circuit voltage:
8.2 V
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
output internal data width max:
16 bits
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
56 mA
power consumption field supply module with no external load:
11 mA
power consumption pmax:
1.2 W
power loss pl:
0.54 W
protection type:
IP20
rated surge voltage:
1 kV: Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)
reactances ex ia i:
Lo = 100 mH: Co = 38 F
reactances ex ia iia:
Lo = 100 mH: Co = 39 F
reactances ex ia iib:
Lo = 100 mH: Co = 9.9 F
reactances ex ia iic:
Lo = 100 mH: Co = 1.5 F
reactances note:
Reactances without accounting for the concurrence of L and C
relative humidity with condensation:
Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
relative humidity without condensation:
0.95
safety relevant data circuit:
Uo = 11.76 V: Io = 12.48 mA: Po = 36.67 mW: Linear characteristic curve
sensor connection:
4 x (2-wire)
shock resistance:
Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks: 25g/6 ms/1,000 shocks), EN 61373
short circuit current:
¤ 8.2 mA ( 0.2 mA)
signal current 0 namur:
1.2 mA
signal current 1 namur:
2.1 mA
signal type:
NAMUR
solid conductor:
0.25 2.5 mm / 24 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC: (Ex i XTR power supply: UO = max. 26.8 V): via power jumper contacts (power supply via blade contact: transmission via spring contact)
supply voltage sensor:
8.2 VDC: Short-circuit-protected, isolated channels
supply voltage system:
5 VDC: via data contacts
surrounding air temperature operation:
-40 70 C
surrounding air temperature storage:
-40 85 C
switching hysteresis:
0.2 mA
total number of channels module:
8
vibration resistance:
Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3
weight:
93.800 g
width:
24 mm / 0.945 inch
  • Wago 750-439/040-000
  • Wago 750-439/040-000
  • Wago 750-439/040-000
$1,072.00

Description

8DINAMUR Ex i XTR.

The WAGO 750 XTR series is an intrinsically-safe standard DC digital input slice module designed for extended temperature ranges, featuring 8 digital inputs (NAMUR, high-side switching, 2-wire, 3ms filter). It operates on a 5V DC supply voltage provided by the system and utilizes spring CAGE CLAMP connections. The module is mounted on a DIN-35 rail with a 24mm width and has an IP20 protection rating. It is suitable for ambient temperatures ranging from -40°C to +70°C and is equivalent to the model number 750439040000.

View AllClose