ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc: II (1) D [Ex ia Da] IIIC: I (M1) [Ex ia Ma] I
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
note:
The digital output module must only be operated via 24 VDC Ex i!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 manuals!
number of digital outputs:
2
number of incoming power jumper contacts:
2
number of outgoing power jumper contacts:
2
operating altitude:
0 2000 m
output characteristic:
High-side switching
output internal data width max:
2 bits
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
7 mA
power consumption field supply module with no external load:
8.5 mA
power consumption pmax:
2.1 W (at 40 mA output current)
power loss pl:
1.1 W (at 40 mA output current)
protection type:
IP20
reactances ex ia i:
Lo = 20 mH: Co = 3.6 F
reactances ex ia iia:
Lo = 18 mH: Co = 2.2 F
reactances ex ia iib:
Lo = 12 mH: Co = 680 nF
reactances ex ia iic:
Lo = 3 mH: Co = 88 nF
reactances note:
Reactances without accounting for the concurrence of L and C
relative humidity without condensation:
0.95
safety relevant data circuit:
Uo = 27.3 V: Io = 106 mA: Po = 723 mW: Linear characteristic curve
shock resistance:
15g per IEC 60068-2-27
signal type:
Voltage
solid conductor:
0.08 2.5 mm / 28 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC: (Ex i power supply: UO = max. 27.3 V): via power jumper contacts (power supply via blade contact: transmission via spring contact)