LED (STOP) red: Device/node Stop: LED (RUN) green: Initialization: LED (TX, RX OVERFLOW) red: CAN send/receive buffer overflow: LED (I/O, USR) red/green/orange: Local status, status programmable by user: LED (A, B) green: System power supply status,
input and output fieldbus process image max:
512 Byte/512 Byte
input current typ at nominal load 24 v:
500 mA
isolation:
500 V system/field
memory for fieldbus input variables max:
512 Byte
memory for fieldbus output variables max:
512 Byte
mounting position:
Any
mounting type:
DIN-35 rail
node id distribution:
DIP switch
non volatile software memory:
8 kB
note:
Note: Configuration files required (EDS)!The EDS files can be downloaded for free at www.wago.com.
number of fieldbus nodes on master max:
110
number of modules per node max:
64
number of outgoing power jumper contacts:
3
number of pdos:
32 Tx / 32 Rx
number of sdos:
2 SDO servers / 16 SDO clients
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
350 mA
power supply efficiency typ at nominal load 24 v:
0.87
program memory:
128 kByte
programming environment:
WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
programming languages per iec 61131 3:
Instruction List (IL) || Ladder Diagram (LD) || Function Block Diagram (FBD), Continuous Function Chart (CFC) || Structured Text (ST) || Sequential Function Chart (SFC)
Communication profile: DS-301 V4.01: device profile: DS-401 V2.0: limit monitoring, flank-triggered PDOs, configurable response in the event of an error, DSP 405, NMT master programmable using function blocks