Wago

WAGO 788-906

(No reviews yet) Write a Review
SKU:
788-906
MPN:
788-906
Condition:
New
connection technology:
Push-in CAGE CLAMP
contact material relay:
AgNi + Au
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
64 mm / 2.52 inch
dielectric strength control load circuit ac 1 min:
4 kVrms
dielectric strength load load circuit ac 1 min:
2.5 kVrms
dielectric strength open contact ac 1 min:
1.5 kVrms
drop out time typ:
12 ms
electrical life no resistive load 23 c:
200 x 103 switching operations
fine stranded conductor:
0.34 2.5 mm / 22 14 AWG
fire load:
0.675 MJ
height:
86 mm / 3.386 inch
input voltage range:
-15 +10 %
limiting continuous current:
0.3 A
mechanical force guided operation:
Type A
mechanical life:
50 x 106 switching operations
mounting type:
DIN-35 rail
nominal input current at un:
30 mA
nominal input voltage un:
DC 24 V
note:
Reinforced insulation between coil and contactsTo protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
number of changeover switchover contacts:
2
packaging type:
Box
pollution degree:
2
processing temperature:
-25 +50 C
protection type:
IP20
pull in time typ:
15 ms
rated surge voltage:
4 kV
rated voltage:
250 V
recommended minimum load:
0.1 V / 1 mA / 1 mW
safety information 1:
Per EN 61810-3, it is only permitted to use 1 make contact/1 break contact for safety circuits (11-14 and 22-21 or 12-11 and 21-24).A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for
solid conductor:
0.34 2.5 mm / 22 14 AWG
standards specifications:
EN 61010-2-201 || EN 61810-1 || EN 61810-3 || UL 508 (max. 40 C)
status indicator:
Green LED
strip length:
9 10 mm / 0.35 0.39 inch
surrounding air operating temperature for ul:
-40 40 C
surrounding air temperature operation at un:
-40 70 C
surrounding air temperature storage:
-40 70 C
switching frequency with without load max:
6 min-1 / 600 min-1
switching power resistive max:
AC 18 VA
switching voltage max:
AC 60 V
weight:
50.000 g
width:
15 mm / 0.591 inch
  • Wago 788-906
  • Wago 788-906
  • Wago 788-906
$48.86

Description

Safety relay (2 Changeover contacts); with driven gold contacts (type A) and status indication; Nominal input voltage Un DC 24 V

  • Reinforced insulation between coil and contacts
  • A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
  • To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
.

The WAGO 788 series plug-in relay assembly features a socket base with a green LED, 2-pole (2P) configuration, and operates with a control voltage of 20.4-26.4Vdc (24Vdc nominal). It has a 2C/O (DPDT) contact design, is electromechanical, and supports a rated current of 50mA (30Vdc; DC-13) to prevent gold flash evaporation. The relay includes Push-in CAGE CLAMP connections, is designed for DIN-35 rail mounting with a 15mm width, and has an IP20 protection rating. The contacts are made of hard gold-plated silver-nickel (AgNi + Au), and it is equivalent to model 788906.

View AllClose