Baumer FFAK 16PTD1001/L 10219642 is a liquid level sensor equipped with a pulsed infrared diode light source and operates at a nominal pressure of 10 bar at the probe tip. It features a yellow LED output indicator and has a fixed sensitivity. The sensor operates on a voltage supply range of 10 to 30 VDC, with a maximum current consumption of 15 mA and a voltage drop of less than 2 VDC. It provides a normally open (NO) output function via a PNP output circuit and can handle an output current of up to 200 mA. The sensor lacks short circuit protection but includes reverse polarity protection from Vs to GND. It has a cylindrical design with dimensions of 30 mm in width/diameter and 81 mm in height/length, and it uses an M16x1 mm thread. Both the sensing device and housing are made of polysulphone. It connects via a 3-pin, 2-meter cable and operates within a temperature range of 0 to +65 °C. The sensor is rated at IP 67 for protection against dust and immersion.
- Type:
- Liquid level sensor
- Light source:
- Pulsed infrared diode
- Nominal pressure (probe tip):
- 10 bar
- Output indicator:
- LED yellow
- Sensitivity adjustment:
- No
- Wave length:
- 880 nm
- Measurement type:
- Contact with medium
- Voltage supply range +Vs:
- 10 30 VDC
- Current consumption max. (no load):
- 15 mA
- Voltage drop Vd:
- <2 VDC
- Output function:
- Normally open (NO)
- Output circuit:
- PNP
- Output current:
- 200 mA
- Short circuit protection:
- No
- Reverse polarity protection:
- Yes, Vs to GND
- Width / diameter:
- 30 mm
- Height / length:
- 81 mm
- Thread:
- M16x1 mm
- Design:
- Cylindrical
- Material (sensing device):
- Polysulphone
- Housing material:
- Polysulphone
- Connection types:
- Cable 3 pin, 2 m
- Operating temperature:
- 0 +65 °C
- Protection class:
- IP 67
- Datasheet:
- View
