The Baumer MY-COM F30/S35 10240974 is a high-precision mechanical contact sensor featuring a repeat accuracy of 0.001 mm and an activating force of 30 cN. It has a mechanical pre-run/overrun of approximately -/1.5 mm and operates with a frontal direction of approach. This sensor supports a maximum DC voltage of 15 VDC with a switching current of up to 2 mA, and a maximum AC voltage of 24 VAC with a switching current of up to 50 mA. It includes a break function (NC) mechanical output circuit and an activating pin made of zirconium oxide ZrO2. The housing is made of brass nickel-plated material, with a cylindrical threaded design measuring 8 mm in diameter and 38 mm in length. It connects via an M8 connector and operates within a temperature range of -20 to +75 °C. The sensor is rated at IP 50 for protection. For more detailed information, you can access the datasheet [here](https://www.baumer.com/medias/__secure__/My_Com_F30_S35_web_EN.pdf?mediaPK=8799752912926).
- Repeat accuracy:
- 0.001 mm
- Activating force:
- 30 cN
- Mech. pre-run / overrun:
- - / 1,5 mm approx.
- Measurement type:
- Contact with medium
- Direction of approach:
- Frontal
- DC voltage max.:
- 15 VDC
- Switch. current DC max.:
- 2 mA
- AC voltage max.:
- 24 VAC
- Switch. current AC max.:
- 50 mA
- Output circuit:
- Break function (NC) mechanical
- Activating pin:
- Zirconium oxide ZrO2
- Housing material:
- Brass nickel plated
- Dimension:
- 8 mm
- Design:
- Cylindrical threaded
- Housing length:
- 38 mm
- Connection types:
- Connector M8
- Operating temperature:
- -20 +75 °C
- Protection class:
- IP 50
- Datasheet:
- View
