Schneider Electric

Schneider Electric 2510KS2 Switch, manual, 30A, 3 pole, 10 HP at 575 VAC, three phase, toggle operated, no indicator, NEMA 1 stainless steel flush

(No reviews yet) Write a Review
SKU:
2510KS2
MPN:
2510KS2
Condition:
New
Electrical Connection:
screw clamp terminals
Eu Rohs Directive:
Not compliant
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Product Or Component Type:
Single Unit Manual Switch
Pvc Free:
Yes
Line Rated Current:
30 A
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Awg Gauge:
AWG 14...AWG 10 copper
Nema Degree Of Protection:
not rated (flush plate) Stainless Steel standard size
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Depth:
2.5 in
Poles Description:
3P
Phase:
3 phase
Local Signaling:
no indicator
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Country of Origin:
Mexico
Warranty:
18 months
Control Type:
toggle
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Motor Starter Type:
non reversing
Range Of Product:
K
Maximum Horse Power Rating:
2 hp 115 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC || 7.5 hp 230 V AC || 10 hp 460 V AC || 10 hp 575 V AC
$156.57

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Manual Switches. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, 10 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 flush mounted unit with a stainless steel flush plate can be mounted in a standard switch box or in a machine cavity without a box. Enclosure is 4.50 inches tall, 2.75 inches wide and 2.50 inches deep. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products