Schneider Electric

Schneider Electric 2510KW2C Switch, manual, 30A, 3 pole, 10 HP at 575 VAC, three phase, toggle operated, red 440/600 VAC indicator, NEMA 4 enclosure

(No reviews yet) Write a Review
SKU:
2510KW2C
MPN:
2510KW2C
Condition:
New
Cable Entry:
0.75 NPT (bottom)
Product Or Component Type:
Single Unit Manual Switch
Nema Degree Of Protection:
NEMA 4 die cast zinc alloy standard size
Control Type:
toggle
Maximum Horse Power Rating:
2 hp 115 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC || 7.5 hp 230 V AC || 10 hp 460 V AC || 10 hp 575 V AC
Electrical Connection:
screw clamp terminals
Country of Origin:
Mexico
Warranty:
18 months
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pvc Free:
Yes
Depth:
4.56 in
Line Rated Current:
30 A
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Eu Rohs Directive:
Not compliant
Phase:
3 phase
Local Signaling:
red indicator, 440...600 V
Range Of Product:
K
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Poles Description:
3P
Awg Gauge:
AWG 14...AWG 10 copper
Motor Starter Type:
non reversing
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
$525.40

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Overload protection for the motor must be supplied separately. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, 10 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This device has a 440 to 600 V red pilot light indicator. A NEMA 4 watertight and dusttight die cast zinc alloy enclosure is used to protect this manual motor switch. This enclosure has one conduit entry on the bottom. The 0.75 inch conduit entry is tapped with number 14 pipe threads. This device is 4.38 inches tall, 3.00 inches wide and 4.56 inches deep. A toggle handle is used to turn the manual starter on and off. The toggle handle can be padlocked in the off position. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products