Schneider Electric

Schneider Electric 8536SCG1V02S NEMA Motor Starter, Type S, nonreversing, Size 1, 27A, 3 HP at 230 VAC, 5 kA SCCR, 1 phase, 2 pole, melting alloy, 120 VAC coil, NEMA 1

(No reviews yet) Write a Review
SKU:
8536SCG1V02S
MPN:
8536SCG1V02S
Condition:
New
Local Signaling:
without pilot light
Pvc Free:
Yes
Nema Degree Of Protection:
NEMA 1 painted sheet steel
Rated Power In Hp:
3 HP 230 V AC || 2 HP 115 V AC
Depth:
141 mm
Product Or Component Type:
motor starter
Range Of Product:
S
Product Certifications:
UL Listed || CSA || NEMA
Control Type:
no control units
Eu Rohs Directive:
Not compliant
Motor Starter Type:
non reversing
Phase:
1 phase
Line Rated Current:
27 A
Electrical Connection:
screw clamp terminals
Control Circuit:
separate control circuit
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Country of Origin:
Mexico
Auxiliary Contact Composition:
without
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Poles Description:
2P
[Uc] Control Circuit Voltage:
110 V AC 50 Hz || 120 V AC 60 Hz
[Ue] Rated Operational Voltage:
600 V AC
Thermal Overload Type:
melting alloy 1
Nema Size:
1
Warranty:
18 months
$539.00

Description

Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 2 pole NEMA Size 1 non-reversing starter has a 27 ampere rating. This NEMA Size 1 motor starter has single phase ratings of 2 HP at 115 VAC and 3 HP at 230 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this starter. Enclosure is 10.00 inches tall, 6.00 inches wide and 5.56 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
View AllClose