null
Schneider Electric 8911DPSG13V09 Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

Schneider Electric 8911DPSG13V09 Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

Schneider Electric
SKU:
8911DPSG13V09
$385.04
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. This three pole definite purpose starter has a full load rating of 20 amperes. This starter has ratings of 1.5 HP at 115 VAC and 3 HP at 230 VAC single phase. It has a 7.5 HP at 230 VAC, 460 VAC and 575 VAC poly phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208 to 240 VAC 60 HZ and 220 VAC 50 Hz coil. The starter has straight through wiring. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this definite purpose starter. Enclosure is 10.00 inches tall, 6.00 inches wide and 5.56 inches deep. Auxiliary contacts are available for these starters. 8911DPS definite purpose starters are UL component recognized.
Additional Information
Country of Origin:
China
Number Of Thermal Units Required:
3
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Phase:
3 phase
Eu Rohs Directive:
Compliant with Exemptions
Product Or Component Type:
Definite Purpose Starter
Poles Description:
3P
Mercury Free:
Yes
Warranty:
18 months
Enclosure Material:
painted sheet steel
Rohs Exemption Information:
Yes
Line Rated Current:
20 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Locked Rotor Rated Current:
120 A 230 V AC || 100 A 460 V AC || 80 A 575 V AC
Thermal Overload Type:
melting alloy
Maximum Horse Power Rating:
3-3 hp 230 V AC, 1 phase || 7.5-7.5 hp 230 V AC, 3 phase || 1.5-1.5 hp 115 V AC, 1 phase || 7.5-7.5 hp 460 V AC, 3 phase || 7.5-7.5 hp 575 V AC, 3 phase
Nema Degree Of Protection:
NEMA 1
[Uc] Control Circuit Voltage:
220 V AC 50 Hz || 208...240 V AC 60 Hz
Range Of Product:
DPS
[Ue] Rated Operational Voltage:
600 V AC
Related Products