Schneider Electric

Schneider Electric EMS58588 Easergy PS50-48V: Power supply and battery charger 12V and 48V outputs

(No reviews yet) Write a Review
SKU:
EMS58588
MPN:
EMS58588
Condition:
New
Reach Free Of Svhc:
Yes
Input Voltage Limits:
440 V AC/DC L-N)
Overvoltage Category:
IV
Product Compatibility:
BAT24AH || BAT38AH
Product Or Component Type:
power supply
Output Voltage:
12 V DC || 48 V DC
Ip Degree Of Protection:
IP20 conforming to IEC 60529
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Autonomy:
16 h
Net Weight:
2.75 kg
Rohs Exemption Information:
Yes
Number Of Outputs:
battery fault (BAT) 1 digital (relay) || main presence 1 digital (relay)
Communication Port Protocol:
Modbus
Circularity Profile:
ENVEOLI1605007_V3
Product Certifications:
CE
Relative Humidity:
5-95 % conforming to IEC 60068-2-30
China Rohs Regulation:
X
Ambient Air Temperature For Operation:
-40-70°C
Operating Position:
vertical
Weight:
2.75 kg
Charging Time:
24 h
Operating Altitude:
6561.68 ft (2000 m)
Ik Degree Of Protection:
IK07 conforming to IEC 62262
Mounting Support:
DIN rail
Battery Capacity:
24 Ah 12 V, Lead-Acid battery || 38 Ah 12 V, Lead-Acid battery
Communication Port Support:
RS485
Standards:
IEC 60255-27
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Depth:
71 mm
Range Of Product:
Easergy T300
Device Short Name:
PS50
Mercury Free:
Yes
Eu Rohs Directive:
Compliant
Mechanical Robustness:
vibrations 10-2000 Hz 1 gn 10 cycles conforming to IEC 60068-2-6 || bumps 10 gn 16 ms 1000 bumps non energized conforming to IEC 60068-2-29 || shocks 10 gn 11 ms 3 pulses in operation conforming to IEC 60068-2-27
Surge Withstand:
20 kV 1.2/50µs
Protection Type:
against short-circuits || integrated thermal protection
Electromagnetic Compatibility:
electrical fast transient/burst immunity test - test level: level 4 criteria A conforming to IEC 61000-4-4 || conducted and radiated emissions class A conforming to EN 55022 || conducted RF disturbances - test level: level 3 criteria A conforming to
Environmental Disclosure:
ENVPEP1605007_V2
Rated Short-Duration Power Frequency Withstand Voltage:
10 kV 50 Hz 1 min
Toxic Heavy Metal Free:
Yes
Country of Origin:
Czechia
Sustainable Offer Status:
Green Premium product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
110...240 V DC || 110...240 V AC 50/60 Hz
Ambient Air Temperature For Storage:
-40-70°C
$3,780.43

Description

The Easergy T300 backup power supplies are designed for long power supply interruption and to maintain control and monitoring of the entire MV substation during outages. Designed for 50Hz or 60Hz networks, supply voltage can range from 110 to 220VDAC or 90 to 264VAC. This product can be installed on DIN rail. The operating temperature is -40°C to + 70°C. The storage temperature is -40°C to + 70°C. This device has 1 digital relay output for battery fault signalling, and 1 digital relay output for main presence. Complient to standards IEC 60255-27, CE certification. Communication enabled with a RS485 serial port and the Modbus port protocol. Mechanical dimensions are 190 mm in height, 270 mm in width and 71 mm in depth.
View AllClose