Schneider Electric

Schneider Electric HR2IMA24C Surge protection device, Surgelogic, HR, 240kA, 208Y/120 VAC, 3 phase, 4 wire, SPD type 2

(No reviews yet) Write a Review
SKU:
HR2IMA24C
MPN:
HR2IMA24C
Condition:
New
Trip Unit Technology:
electronic
Local Signaling:
status LED green per phase normal operation || status LED red per phase fault
Rohs Exemption Information:
Yes
Breaking Capacity Code:
HR
Wiring Configuration:
4-wire
Breaking Capacity:
100 kA
Depth:
142.1 mm
Range Of Product:
Surgelogic
Mounting Support:
panel mounting
Connections - Terminals:
I-Line line || lugs ground AWG 6 copper 4 N.m || lugs neutral AWG 6 copper 4 N.m
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
3 phase
Number Of Poles:
3
Product Or Component Type:
surge protection device
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nema Degree Of Protection:
NEMA 2
Length:
483 mm
Eu Rohs Directive:
Compliant with Exemptions
Provided Equipment:
alarm enable/disable switch || surge counter || circuit-breaker
Device Short Name:
IMA
Country of Origin:
Mexico
[Uc] Maximum Continuous Operating Voltage:
150 V
[Ue] Rated Operational Voltage:
208Y/120 V AC
Short-Circuit Protection:
200 kA
Cable Length:
483 mm
Surge Current:
240 kA
Line Rated Current:
60 A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Standards:
UL 1449:ed. 3 || UL 1283:ed. 5 || CSA C22.2 No 8:1986 || UL 96A:ed. 12 || UL 489:ed. 11 || CSA C22.2 No 5-09
$16,170.00

Description

Surgelogic™ Type IMA systems are internal surgical protection devices with a focus on service entrance and critical branch panel surge suppresion. With a surge current rating of 240,000 Amps and enhanced EMI/RFI filtering, this unit is retrofitted to be installed in a wide variety I-Line Branch units. Being modular in design, this unit is able to achieve superior surge suppression on the load side including at the branch panel. This unit provides surge suppression from transient service entrance panels to point-of-use equipment. This product is UL and CSA certified.
View AllClose

Related Products

Related Products