Schneider Electric

Schneider Electric LC1G4004EHEA Contactor, high power, TeSys Giga, advanced version, AC-1, <= 440V, 550A, 4 pole/NO, 48-130VAC/DC coil

(No reviews yet) Write a Review
SKU:
LC1G4004EHEA
MPN:
LC1G4004EHEA
Condition:
New
Height:
290 mm
Sustainable Offer Status:
Green Premium product
Utilisation Category:
AC-3 || AC-3e || AC-1 || AC-5a || AC-5b || AC-6a || AC-6b || DC-1 || DC-3 || DC-5
Safety Reliability Level:
B10d = 400000 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 3000000 cycles contactor with mechanical load EN/ISO 13849-1
California Proposition 65:
WARNING: This product can expose you to chemicals including: Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For m
Auxiliary Contact Composition:
1 NO + 1 NC
Inrush Power In W:
360 W
Range:
TeSys
Associated Fuse Rating:
500 A aM at <= 440 V for motor || 315 A aM at <= 690 V for motor || 630 A gG at <= 690 V
Mechanical Robustness:
vibrations 5-300 Hz 2 gn contactor open || vibrations 5-300 Hz 4 gn contactor closed || shocks 10 gn 11 ms contactor open || shocks 15 gn 11 ms contactor closed
Device Short Name:
LC1G
Inrush Power In Va:
450-450 VA
Contactor Application:
power switching
Range Of Product:
TeSys Giga
Ip Degree Of Protection:
IP2X front face with shrouds IEC 60529 || IP2X front face with shrouds VDE 0106
Halogen Content Performance:
Halogen free plastic parts product
Average Impedance:
0.0001 Ohm
Depth:
226 mm
Maximum Horse Power Rating:
125 hp at 200/208 V 60 Hz || 150 hp at 230/240 V 60 Hz || 300 hp at 460/480 V 60 Hz || 400 hp at 575/600 V 60 Hz
Coil Technology:
built-in bidirectional peak limiting
[Icw] Rated Short-Time Withstand Current:
3.6 kA - 10 s || 2.4 kA - 30 s || 1.7 kA - 1 min || 1.2 kA - 3 min || 1.0 kA - 10 min
[Ie] Rated Operational Current:
400 A (at <60°C) at <= 440 V AC-3 || 550 A (at <40°C) at <= 1000 V AC-1
[Uc] Control Circuit Voltage:
48...130 V AC 50/60 Hz || 48...130 V DC
Tightening Torque:
35 N.m
Overvoltage Category:
III
Compatibility Code:
LC1G
Power Dissipation Per Pole:
30 W AC-1 - Ith 550 A || 16 W AC-3 - Ith 400 A
Rated Breaking Capacity:
3480 A at 440 V
Hold-In Power Consumption In W:
8.3-8.3 W
[Ue] Rated Operational Voltage:
<= 1000 V AC 50/60 Hz || <= 460 V DC
Color:
dark grey
Ambient Air Temperature For Storage:
-60-80°C
Net Weight:
8.7 kg
Product Or Component Type:
contactor
[Ui] Rated Insulation Voltage:
1000 V
Ambient Air Temperature For Operation:
-25-60°C
Mechanical Durability:
8 Mcycles
Standards:
EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || JIS C8201-4-1 || JIS C8201-5-1 || UL 60335-1 || UL 60335-2-40:Annex JJ
Pole Contact Composition:
4 NO
Width:
185 mm
Country of Origin:
China
Eu Rohs Directive:
Compliant with Exemptions
Circularity Profile:
ENVEOLI2105013
Environmental Disclosure:
ENVPEP2105013
Product Certifications:
CB Scheme || CCC || cULus || EAC || CE || UKCA || EU-RO-MR by DNV-GL
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Protective Treatment:
TH
Permissible Ambient Air Temperature Around The Device:
-40-70°C at Uc
Rohs Exemption Information:
Yes
Maximum Operating Rate:
600 cyc/h AC-3 || 600 cyc/h AC-3e || 300 cyc/h AC-1
$2,560.00

Description

TeSys Giga high power contactor, 4 poles (4 NO) for category AC-1 applications up to 550A @440V. It provides a 48-130V AC/DC wide band low consumption electronic coil, PLC output control and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local and Remote Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection with cable memory kit and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 290mm x 185mm x 209mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.
View AllClose