Schneider Electric

Schneider Electric LDA36250U31X Circuit breaker, PowerPacT L, 250A, 3 pole, 600VAC, 14kA, I-Line, MicroLogic 3.3, 80%, ABC

(No reviews yet) Write a Review
SKU:
LDA36250U31X
MPN:
LDA36250U31X
Condition:
New
Control Type:
toggle
Pollution Degree:
3 IEC 60947-1
Network Frequency:
50/60 Hz
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Communication Interface:
Modbus || Ethernet
Product Certifications:
UL || CSA || NOM
Mounting Height:
6 in
Eu Rohs Directive:
Compliant with Exemptions
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Width:
140 mm
Length:
31 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Utilisation Category:
category A
Range:
PowerPact
Ip Degree Of Protection:
front cover IP40
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz UL 489 || 14 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Ambient Air Temperature For Storage:
-50-85°C
Device Short Name:
L-Frame
Environmental Disclosure:
ENVPEP2206029EN
Ambient Air Temperature For Operation:
-25-70°C
Line Rated Current:
250-250 A
Poles Description:
3P
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Country of Origin:
United States
Circuit Breaker Application:
HACR rated
Suitability For Isolation:
yes IEC 60947-2
Product Or Component Type:
circuit breaker
Tightening Torque:
50-50 N.m 35-300 mm² (AWG 2...600 kcmil) || 50-50 N.m 35-240 mm² (AWG 2...500 kcmil)
Wire Stripping Length:
31 mm
Depth:
110 mm
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Height:
340 mm
Sustainable Offer Status:
Green Premium product
Weight:
6.2 kg
Pvc Free:
Yes
Color:
Black
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Product Name:
PowerPact L
Terminal Identifier:
AL400L61K3
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Continuous Current Rating:
0.8
Device Application:
distribution
Mercury Free:
Yes
Trip Unit Name:
MicroLogic 3.3
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Awg Gauge:
AWG 2...600 kcmil copper || AWG 2...500 kcmil aluminium
$5,122.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 250A, 3 pole, circuit breaker has an interrupting rating of 14kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose