Schneider Electric SH31003P11A2100 servo motor SH3 100 8Nm,key,single,nobrake,90°conn.IP65/IP65,6k RPM
SKU:
SH31003P11A2100
UPC:
MPN:
SH31003P11A2100
Condition:
New
Phase:
three phase
Number Of Motor Poles:
4
Shaft End:
parallel key
Product Or Component Type:
servo motor
Circularity Profile:
N/A
Maximum Current Irms:
28.3 A
[Us] Rated Supply Voltage:
115...480 V
Width:
6 mm
Device Short Name:
SH3.....P
Warranty:
18 months
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm
Stator Inductance:
13.45 mH
Sustainable Offer Status:
Green Premium product
Maximum Mechanical Speed:
6000 rpm
Net Weight:
7.5 kg
Shaft Diameter:
19 mm
Electrical Connection:
straight connector
Country of Origin:
United States
Continuous Stall Current:
6.6 A
Centring Collar Diameter:
95 mm
Torque Constant:
1.22 N.m/A 120°C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Support:
international standard flange
Type Of Cooling:
natural convection
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Range Compatibility:
PacDrive 3
Peak Stall Torque:
28.3 N.m 115...480 V three phase
Length:
240.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Axial Force Fa:
160 N
Shaft Length:
40 mm
Rotor Inertia:
3.22 kg.cm²
Circle Diameter Of The Mounting Holes:
115 mm
Continuous Power:
2400 W
Number Of Mounting Holes:
4
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Encoder Type:
absolute single turn SinCos Hiperface
China Rohs Regulation:
X
Back Emf Constant:
77 V/krpm 20°C
Centring Collar Depth:
3.5 mm
Motor Flange Size:
100 mm
Mounting Holes Diameter:
9.0 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Holding Brake:
without
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Nominal Output Power:
790 W 115 V single phase || 1470 W 230 V single phase || 2390 W 400 V three phase || 2560 W 480 V three phase
