Schneider Electric SH32051P02F1100 servo motor SH3 205 36,9Nm,nokey,multi,brake,str.conn,IP65/IP65,3.8k RPM
SKU:
SH32051P02F1100
UPC:
MPN:
SH32051P02F1100
Condition:
New
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Maximum Axial Force Fa:
740 N
Range Compatibility:
PacDrive 3
Nominal Torque:
31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase
[Us] Rated Supply Voltage:
115...480 V
Country of Origin:
United States
Net Weight:
38.6 kg
Torque Constant:
1.6 N.m/A 120°C
Mounting Support:
international standard flange
Centring Collar Depth:
4 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Mounting Holes Diameter:
14 mm
Continuous Stall Current:
21 A
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Number Of Motor Poles:
5
Stator Inductance:
8.7 mH
Back Emf Constant:
104 V/krpm 20°C
Device Short Name:
SH3.....P
Warranty:
18 months
Product Or Component Type:
servo motor
Shaft Length:
80 mm
Maximum Radial Force Fr:
3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
Type Of Cooling:
natural convection
Environmental Disclosure:
ENVPEP111049EN
Electrical Connection:
straight connector || rotatable right angled connector
Length:
370.5 mm
Rohs Exemption Information:
Yes
Holding Torque:
80 N.m
Continuous Stall Torque:
36.9 N.m 115...480 V three phase
Holding Brake:
with
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
China Rohs Regulation:
X
Rotor Inertia:
87.4 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Motor Flange Size:
205 mm
Nominal Output Power:
2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase
Stator Resistance:
0.3 Ohm
Speed Feedback Resolution:
128 periods
Continuous Power:
5500 W
Circle Diameter Of The Mounting Holes:
215 mm
Number Of Mounting Holes:
4
Shaft End:
smooth shaft
Maximum Current Irms:
87.2 A
Sustainable Offer Status:
Green Premium product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.