Schneider Electric SH32053P12F2000 servo motor SH3 205 94,4Nm,key,multi,brake,90°conn.IP54/IP65,3.8k RPM
SKU:
SH32053P12F2000
UPC:
MPN:
SH32053P12F2000
Condition:
New
Maximum Mechanical Speed:
3800 rpm
Shaft End:
parallel key
Maximum Current Irms:
136.1 A
Net Weight:
70.6 kg
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Power:
10600 W
Mounting Support:
international standard flange
Maximum Axial Force Fa:
740 N
Holding Brake:
with
Shaft Diameter:
38 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Or Component Type:
servo motor
Country of Origin:
United States
Device Short Name:
SH3.....P
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Torque Constant:
2.76 N.m/A 120°C
Nominal Torque:
84.9 N.m 115 V single phase || 74.4 N.m 230 V single phase || 50.7 N.m 400 V three phase || 40.2 N.m 480 V three phase
Back Emf Constant:
172 V/krpm 20°C
Stator Inductance:
6.3 mH
Weight:
70.6 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Radial Force Fr:
4500 N 1000 rpm || 3570 N 2000 rpm || 3120 N 3000 rpm
Continuous Stall Current:
33.2 A
Motor Flange Size:
205 mm
[Us] Rated Supply Voltage:
115...480 V
Type Of Cooling:
natural convection
Nominal Output Power:
4450 W 115 V single phase || 7790 W 230 V single phase || 10620 W 400 V three phase || 10100 W 480 V three phase
Holding Torque:
80 N.m
Peak Stall Torque:
330 N.m 115...480 V three phase
Sustainable Offer Status:
Green Premium product
Number Of Motor Poles:
5
Electrical Connection:
straight connector
Circularity Profile:
N/A
Phase:
three phase
Shaft Length:
80 mm
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP111049EN
Pvc Free:
Yes
Range Compatibility:
PacDrive 3
Key Width:
10 mm
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
