Schneider Electric

Schneider Electric TPRST038 Motor starter, TeSys island, 40A at AC-1, 38A at AC-3, 18.5kW, 20hp, DOL type

(No reviews yet) Write a Review
SKU:
TPRST038
MPN:
TPRST038
Condition:
New
Thermal Protection Adjustment Range:
0.76-38 A
Rohs Exemption Information:
Yes
Irms Rated Making Capacity:
550 A at 440 V conforming to IEC 60947
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Weight:
0.718 kg
[Ue] Rated Operational Voltage:
<= 480 V AC 47...63 Hz for overvoltage cat. III || <= 690 V AC 47...63 Hz for overvoltage cat. II
Standards:
EN/IEC 60947-1 || EN/IEC 60947-4-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1
Width:
45 mm
Vibration Resistance:
1.5 mm peak to peak 3-13 Hz) IEC 60068-2-6 || 1 gn 13-200 Hz) IEC 60068-2-6
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947-1
Device Presentation:
direct starter connected to an automation controller through a bus coupler || operational only when connected to a bus coupler
Rated Breaking Capacity:
550 A at 440 V conforming to IEC 60947
Protective Treatment:
TC
Thermal Overload Class:
class 5…30
Reset:
remotely or automatically
Device Short Name:
TPRST
[Ui] Rated Insulation Voltage:
690 V IEC 60947-4-1 || 600 V UL 60947-4-1 || 600 V CSA C22.2 No 60947-4-1
Ambient Air Temperature For Operation:
-10-50°C without derating || 50-60°C with current derating
Power Dissipation Per Pole:
2.9 W AC-3 - Ith 38 A || 3.2 W AC-1 - Ith 40 A
Maximum Horse Power Rating:
2 hp at 120 V AC 60 Hz for 1 phase motors || 5 hp at 240 V AC 60 Hz for 1 phase motors || 10 hp at 208 V AC 60 Hz for 3 phase motors || 10 hp at 240 V AC 60 Hz for 3 phase motors || 20 hp at 480 V AC 60 Hz for 3 phase motors || 25 hp at 600 V AC 60 H
Utilisation Category:
AC-1 || AC-2 || AC-3 || AC-4 || AC-3e
Operating Time:
< 100 ms closing || < 30 ms opening
Circularity Profile:
ENVEOLI1904009EN
Product Compatibility:
TPRBC bus coupler || TPRVM voltage interface module
Mechanical Durability:
30 Mcycles
Eu Rohs Directive:
Compliant with Exemptions
Pollution Degree:
2
Net Weight:
0.718 kg
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Fire Resistance:
960°C UL 94 || 850°C IEC 60695-2-1 || 650°C IEC 60695-2-12
Operating Altitude:
0...6561.68 ft (0...2000 m) without derating
Current Consumption:
160 mA contactor sealed || 160 mA contactor closing
Electrical Durability:
1.4 Mcycles 38 A AC-3 440 V || 2 Mcycles 40 A AC-1 440 V
Electromagnetic Compatibility:
electrostatic discharge immunity test, level 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || radiated RF field immunity test, level 3, 10 V/m, conforming to EN/IEC 61000-4-3 || fast transient immunity test, level 4, 4 kV, conforming to E
Ip Degree Of Protection:
IP20
Overvoltage Category:
III for Ue <= 480 V || II for Ue <= 690 V
Country of Origin:
France
Maximum Operating Rate:
3600 cyc/mn AC-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Tightening Torque:
2.5-2.5 N.m flat Ø 6 mm || 2.5-2.5 N.m Philips No 3
Protection Type:
thermal overload protection || motor overheat || overcurrent || undercurrent || jam || long start || stall || rapid cycle lockout || phase sequence || rapid restart lockout || phase loss || phase reversal || phase unbalance || ground current
Relative Humidity:
5-95 %
[Ith] Conventional Free Air Thermal Current:
40 A (at 50°C)
Product Certifications:
CCC || EAC || UL || CSA
[Ie] Rated Operational Current:
38 A (at <50°C) at <= 440 V AC-3 || 40 A (at <50°C) at <= 440 V AC-1
Mounting Mode:
horizontal and vertical 35 mm symmetrical DIN rail)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
$395.00

Description

TeSys island direct starter, 3 poles, 38A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 38A and motors up to 18,5kW@400V / 20hp@480V. It provides motor protection functions including thermal overload (setting 0.76-38A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).
View AllClose