Servo Drives & Motors

Servo Drives & Motors

  • Schneider Electric BMH0703P36F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P36F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key

    Schneider Electric

    $1,241.66
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP65, IP67, 16bit encoder, 3 phases
    SKU:
    BMH0703P36F2A
    Stator Inductance:
    8.6 mH 20 °C
    Brake Pull-In Power:
    7 W
    Rotor Inertia:
    1.78 kg.cm²
    Shaft Length:
    30 mm
    Type Of Cooling:
    natural convection
    Device Short Name:
    BMH
    Range Compatibility:
    Lexium 32
    Centring Collar Diameter:
    60 mm
    Mounting Support:
    international standard flange
    Circle Diameter Of The Mounting Holes:
    82 mm
    Maximum Mechanical Speed:
    8000 rpm
    Pvc Free:
    Yes
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Environmental Disclosure:
    ENVPEP111002EN
    [Us] Rated Supply Voltage:
    480 V
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Phase:
    three phase
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Stator Resistance:
    2.65 Ohm 20 °C
    Electrical Connection:
    rotatable right-angled connectors
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Holding Brake:
    with
    Holding Torque:
    3 N.m holding brake
    Mercury Free:
    Yes
    Key Width:
    20 mm
    Speed Feedback Resolution:
    32768 points/turn
    Continuous Power:
    1.68 W
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Number Of Mounting Holes:
    4
    Centring Collar Depth:
    2.5 mm
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Mounting Holes Diameter:
    5.5 mm
    Second Shaft:
    without second shaft end
    Sustainable Offer Status:
    Green Premium product
    Shaft Diameter:
    14 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Maximum Axial Force Fa:
    0.2 x Fr
    Torque Constant:
    0.87 N.m/A 120 °C
    Number Of Motor Stacks:
    3
    Continuous Stall Current:
    3.91 A
    China Rohs Regulation:
    X
    Length:
    225 mm
    Rohs Exemption Information:
    Yes
    Shaft End:
    keyed
    Feedback Type:
    single turn SinCos Hiperface
    Number Of Motor Poles:
    10
    Net Weight:
    4 kg
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Maximum Permanent Current:
    12.57 A
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Warranty:
    18 months
    Motor Flange Size:
    70 mm
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Product Or Component Type:
    servo motor
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Circularity Profile:
    N/A
    Datasheet:
    View
    $1,241.66
    Add to Cart Quick view
  • Schneider Electric BMH0703P32F1A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P32F1A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key

    Schneider Electric

    $2,586.80
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP65, IP67, 128 multiturn encoder, straight, 3 phases
    SKU:
    BMH0703P32F1A
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Continuous Stall Current:
    3.91 A
    Torque Constant:
    0.87 N.m/A 120 °C
    Brake Pull-In Power:
    7 W
    Holding Torque:
    3 N.m holding brake
    Electrical Connection:
    straight connectors
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Rohs Exemption Information:
    Yes
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Maximum Permanent Current:
    12.57 A
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Key Width:
    20 mm
    Pvc Free:
    Yes
    Motor Flange Size:
    70 mm
    Range Compatibility:
    Lexium 32
    Continuous Power:
    1.68 W
    Circularity Profile:
    N/A
    Shaft End:
    keyed
    Type Of Cooling:
    natural convection
    Length:
    225 mm
    Shaft Length:
    30 mm
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Number Of Motor Stacks:
    3
    Number Of Mounting Holes:
    4
    Maximum Mechanical Speed:
    8000 rpm
    Product Or Component Type:
    servo motor
    Mercury Free:
    Yes
    Feedback Type:
    multiturn SinCos Hiperface
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Warranty:
    18 months
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Stator Inductance:
    8.6 mH 20 °C
    Net Weight:
    4 kg
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Stator Resistance:
    2.65 Ohm 20 °C
    Maximum Axial Force Fa:
    0.2 x Fr
    Phase:
    three phase
    Device Short Name:
    BMH
    Centring Collar Depth:
    2.5 mm
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    China Rohs Regulation:
    X
    Holding Brake:
    with
    Mounting Support:
    international standard flange
    Centring Collar Diameter:
    60 mm
    Environmental Disclosure:
    ENVPEP111002EN
    Sustainable Offer Status:
    Green Premium product
    Number Of Motor Poles:
    10
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Circle Diameter Of The Mounting Holes:
    82 mm
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Speed Feedback Resolution:
    131072 points/turn x 4096 turns
    Second Shaft:
    without second shaft end
    Shaft Diameter:
    14 mm
    [Us] Rated Supply Voltage:
    480 V
    Mounting Holes Diameter:
    5.5 mm
    Rotor Inertia:
    1.78 kg.cm²
    Datasheet:
    View
    $2,586.80
    Add to Cart Quick view
  • Schneider Electric BMH0703P31F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P31F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key

    Schneider Electric

    $2,196.79
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP65, IP67, 128bit encoder, 3 phases
    SKU:
    BMH0703P31F2A
    Centring Collar Depth:
    2.5 mm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Mercury Free:
    Yes
    Electrical Connection:
    rotatable right-angled connectors
    Feedback Type:
    single turn SinCos Hiperface
    Circle Diameter Of The Mounting Holes:
    82 mm
    Motor Flange Size:
    70 mm
    Net Weight:
    4 kg
    Holding Torque:
    3 N.m holding brake
    Number Of Motor Poles:
    10
    Mounting Support:
    international standard flange
    Circularity Profile:
    N/A
    Sustainable Offer Status:
    Green Premium product
    Shaft Length:
    30 mm
    Number Of Mounting Holes:
    4
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Maximum Mechanical Speed:
    8000 rpm
    Product Or Component Type:
    servo motor
    Maximum Axial Force Fa:
    0.2 x Fr
    Number Of Motor Stacks:
    3
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Continuous Stall Current:
    3.91 A
    Speed Feedback Resolution:
    131072 points/turn
    Key Width:
    20 mm
    China Rohs Regulation:
    X
    Type Of Cooling:
    natural convection
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Brake Pull-In Power:
    7 W
    Pvc Free:
    Yes
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Shaft End:
    keyed
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Length:
    225 mm
    Phase:
    three phase
    Stator Inductance:
    8.6 mH 20 °C
    Second Shaft:
    without second shaft end
    Holding Brake:
    with
    Range Compatibility:
    Lexium 32
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Rohs Exemption Information:
    Yes
    Continuous Power:
    1.68 W
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Stator Resistance:
    2.65 Ohm 20 °C
    Device Short Name:
    BMH
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Mounting Holes Diameter:
    5.5 mm
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Environmental Disclosure:
    ENVPEP111002EN
    [Us] Rated Supply Voltage:
    480 V
    Shaft Diameter:
    14 mm
    Maximum Permanent Current:
    12.57 A
    Rotor Inertia:
    1.78 kg.cm²
    Warranty:
    18 months
    Torque Constant:
    0.87 N.m/A 120 °C
    Centring Collar Diameter:
    60 mm
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Datasheet:
    View
    $2,196.79
    Add to Cart Quick view
  • Schneider Electric BMH0703P27F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No
    Add to Cart
    Quick view

    Schneider Electric BMH0703P27F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No

    Schneider Electric

    $1,512.29
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP65, IP67, 16 multiturn encoder, 3 phases
    SKU:
    BMH0703P27F2A
    Net Weight:
    4 kg
    Range Compatibility:
    Lexium 32
    Maximum Permanent Current:
    12.57 A
    Maximum Axial Force Fa:
    0.2 x Fr
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Number Of Mounting Holes:
    4
    Mounting Holes Diameter:
    5.5 mm
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Holding Torque:
    3 N.m holding brake
    Second Shaft:
    without second shaft end
    Maximum Mechanical Speed:
    8000 rpm
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Warranty:
    18 months
    Continuous Power:
    1.68 W
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Rohs Exemption Information:
    Yes
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Shaft Length:
    30 mm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Mercury Free:
    Yes
    Length:
    225 mm
    [Us] Rated Supply Voltage:
    480 V
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Number Of Motor Poles:
    10
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Stator Resistance:
    2.65 Ohm 20 °C
    Phase:
    three phase
    Circle Diameter Of The Mounting Holes:
    82 mm
    Motor Flange Size:
    70 mm
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Brake Pull-In Power:
    7 W
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Rotor Inertia:
    1.78 kg.cm²
    Device Short Name:
    BMH
    Number Of Motor Stacks:
    3
    Shaft End:
    smooth shaft
    Speed Feedback Resolution:
    32768 points/turn x 4096 turns
    Sustainable Offer Status:
    Green Premium product
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Shaft Diameter:
    14 mm
    Centring Collar Depth:
    2.5 mm
    Continuous Stall Current:
    3.91 A
    Electrical Connection:
    rotatable right-angled connectors
    Torque Constant:
    0.87 N.m/A 120 °C
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Circularity Profile:
    N/A
    Product Or Component Type:
    servo motor
    Stator Inductance:
    8.6 mH 20 °C
    Type Of Cooling:
    natural convection
    Environmental Disclosure:
    ENVPEP111002EN
    Feedback Type:
    multiturn SinCos Hiperface
    Holding Brake:
    with
    Centring Collar Diameter:
    60 mm
    China Rohs Regulation:
    X
    Pvc Free:
    Yes
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Mounting Support:
    international standard flange
    Datasheet:
    View
    $1,512.29
    Add to Cart Quick view
  • Schneider Electric BMH0703P26F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No
    Add to Cart
    Quick view

    Schneider Electric BMH0703P26F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No

    Schneider Electric

    $1,209.83
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP65, IP67, 16bit encoder, 3 phases
    SKU:
    BMH0703P26F2A
    Range Compatibility:
    Lexium 32
    Centring Collar Diameter:
    60 mm
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Phase:
    three phase
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Shaft Length:
    30 mm
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Feedback Type:
    single turn SinCos Hiperface
    Stator Inductance:
    8.6 mH 20 °C
    Continuous Stall Current:
    3.91 A
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Maximum Axial Force Fa:
    0.2 x Fr
    Device Short Name:
    BMH
    Maximum Mechanical Speed:
    8000 rpm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Centring Collar Depth:
    2.5 mm
    Rotor Inertia:
    1.78 kg.cm²
    Second Shaft:
    without second shaft end
    Stator Resistance:
    2.65 Ohm 20 °C
    Electrical Connection:
    rotatable right-angled connectors
    Speed Feedback Resolution:
    32768 points/turn
    Motor Flange Size:
    70 mm
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Holding Brake:
    with
    Holding Torque:
    3 N.m holding brake
    Environmental Disclosure:
    ENVPEP111002EN
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Sustainable Offer Status:
    Green Premium product
    Mounting Holes Diameter:
    5.5 mm
    Shaft End:
    smooth shaft
    Shaft Diameter:
    14 mm
    Mounting Support:
    international standard flange
    Number Of Motor Stacks:
    3
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Brake Pull-In Power:
    7 W
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    China Rohs Regulation:
    X
    Number Of Mounting Holes:
    4
    Circularity Profile:
    N/A
    Number Of Motor Poles:
    10
    Mercury Free:
    Yes
    [Us] Rated Supply Voltage:
    480 V
    Maximum Permanent Current:
    12.57 A
    Torque Constant:
    0.87 N.m/A 120 °C
    Continuous Power:
    1.68 W
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Length:
    225 mm
    Warranty:
    18 months
    Type Of Cooling:
    natural convection
    Circle Diameter Of The Mounting Holes:
    82 mm
    Product Or Component Type:
    servo motor
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Pvc Free:
    Yes
    Net Weight:
    4 kg
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Rohs Exemption Information:
    Yes
    Datasheet:
    View
    $1,209.83
    Add to Cart Quick view
  • Schneider Electric BMH0703P22F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No
    Add to Cart
    Quick view

    Schneider Electric BMH0703P22F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No

    Schneider Electric

    $1,724.54
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP65, IP67, 128 multiturn encoder, 3 phases
    SKU:
    BMH0703P22F2A
    Rohs Exemption Information:
    Yes
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Stator Resistance:
    2.65 Ohm 20 °C
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Motor Flange Size:
    70 mm
    Speed Feedback Resolution:
    131072 points/turn x 4096 turns
    Number Of Motor Poles:
    10
    Rotor Inertia:
    1.78 kg.cm²
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Shaft Length:
    30 mm
    Second Shaft:
    without second shaft end
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Pvc Free:
    Yes
    Mercury Free:
    Yes
    Holding Torque:
    3 N.m holding brake
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Circle Diameter Of The Mounting Holes:
    82 mm
    Maximum Mechanical Speed:
    8000 rpm
    Mounting Holes Diameter:
    5.5 mm
    Circularity Profile:
    N/A
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Sustainable Offer Status:
    Green Premium product
    Continuous Power:
    1.68 W
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Range Compatibility:
    Lexium 32
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Phase:
    three phase
    Shaft Diameter:
    14 mm
    Shaft End:
    smooth shaft
    Number Of Mounting Holes:
    4
    Holding Brake:
    with
    Stator Inductance:
    8.6 mH 20 °C
    Feedback Type:
    multiturn SinCos Hiperface
    [Us] Rated Supply Voltage:
    480 V
    Continuous Stall Current:
    3.91 A
    Centring Collar Depth:
    2.5 mm
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Maximum Axial Force Fa:
    0.2 x Fr
    Brake Pull-In Power:
    7 W
    Number Of Motor Stacks:
    3
    Warranty:
    18 months
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Mounting Support:
    international standard flange
    Centring Collar Diameter:
    60 mm
    China Rohs Regulation:
    X
    Product Or Component Type:
    servo motor
    Net Weight:
    4 kg
    Electrical Connection:
    rotatable right-angled connectors
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Length:
    225 mm
    Maximum Permanent Current:
    12.57 A
    Environmental Disclosure:
    ENVPEP111002EN
    Device Short Name:
    BMH
    Torque Constant:
    0.87 N.m/A 120 °C
    Type Of Cooling:
    natural convection
    Datasheet:
    View
    $1,724.54
    Add to Cart Quick view
  • Schneider Electric BMH0703P21F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No
    Add to Cart
    Quick view

    Schneider Electric BMH0703P21F2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No

    Schneider Electric

    $1,432.69
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP65, IP67, 128bit encoder, 3 phases
    SKU:
    BMH0703P21F2A
    Warranty:
    18 months
    Speed Feedback Resolution:
    131072 points/turn
    Electrical Connection:
    rotatable right-angled connectors
    Mounting Support:
    international standard flange
    Range Compatibility:
    Lexium 32
    Back Emf Constant:
    55.8 V/krpm 120 °C
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Product Or Component Type:
    servo motor
    Shaft Length:
    30 mm
    Feedback Type:
    single turn SinCos Hiperface
    Number Of Mounting Holes:
    4
    Length:
    225 mm
    Mounting Holes Diameter:
    5.5 mm
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    China Rohs Regulation:
    X
    Stator Inductance:
    8.6 mH 20 °C
    Number Of Motor Stacks:
    3
    Continuous Power:
    1.68 W
    Circle Diameter Of The Mounting Holes:
    82 mm
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Motor Flange Size:
    70 mm
    Net Weight:
    4 kg
    Number Of Motor Poles:
    10
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Rohs Exemption Information:
    Yes
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Device Short Name:
    BMH
    Sustainable Offer Status:
    Green Premium product
    Maximum Axial Force Fa:
    0.2 x Fr
    Rotor Inertia:
    1.78 kg.cm²
    Environmental Disclosure:
    ENVPEP111002EN
    Maximum Mechanical Speed:
    8000 rpm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Mercury Free:
    Yes
    Holding Brake:
    with
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    [Us] Rated Supply Voltage:
    480 V
    Circularity Profile:
    N/A
    Phase:
    three phase
    Pvc Free:
    Yes
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Stator Resistance:
    2.65 Ohm 20 °C
    Brake Pull-In Power:
    7 W
    Holding Torque:
    3 N.m holding brake
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Type Of Cooling:
    natural convection
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Shaft End:
    smooth shaft
    Centring Collar Diameter:
    60 mm
    Shaft Diameter:
    14 mm
    Centring Collar Depth:
    2.5 mm
    Continuous Stall Current:
    3.91 A
    Second Shaft:
    without second shaft end
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Maximum Permanent Current:
    12.57 A
    Torque Constant:
    0.87 N.m/A 120 °C
    Datasheet:
    View
    $1,432.69
    Add to Cart Quick view
  • Schneider Electric BMH0703P17F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P17F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key

    Schneider Electric

    $1,506.98
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP54, 16 multiturn encoder, 3 phases
    SKU:
    BMH0703P17F2A
    Shaft End:
    keyed
    Phase:
    three phase
    China Rohs Regulation:
    X
    [Us] Rated Supply Voltage:
    480 V
    Speed Feedback Resolution:
    32768 points/turn x 4096 turns
    Net Weight:
    4 kg
    Number Of Motor Poles:
    10
    Torque Constant:
    0.87 N.m/A 120 °C
    Stator Resistance:
    2.65 Ohm 20 °C
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Length:
    225 mm
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Continuous Stall Current:
    3.91 A
    Shaft Length:
    30 mm
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Circle Diameter Of The Mounting Holes:
    82 mm
    Maximum Permanent Current:
    12.57 A
    Mounting Holes Diameter:
    5.5 mm
    Type Of Cooling:
    natural convection
    Holding Torque:
    3 N.m holding brake
    Electrical Connection:
    rotatable right-angled connectors
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Rohs Exemption Information:
    Yes
    Device Short Name:
    BMH
    Rotor Inertia:
    1.78 kg.cm²
    Holding Brake:
    with
    Maximum Mechanical Speed:
    8000 rpm
    Range Compatibility:
    Lexium 32
    Stator Inductance:
    8.6 mH 20 °C
    Ip Degree Of Protection:
    IP54 standard
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Sustainable Offer Status:
    Green Premium product
    Centring Collar Diameter:
    60 mm
    Second Shaft:
    without second shaft end
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Key Width:
    20 mm
    Number Of Motor Stacks:
    3
    Mercury Free:
    Yes
    Mounting Support:
    international standard flange
    Feedback Type:
    multiturn SinCos Hiperface
    Continuous Power:
    1.68 W
    Maximum Axial Force Fa:
    0.2 x Fr
    Number Of Mounting Holes:
    4
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Warranty:
    18 months
    Motor Flange Size:
    70 mm
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Pvc Free:
    Yes
    Shaft Diameter:
    14 mm
    Environmental Disclosure:
    ENVPEP111002EN
    Circularity Profile:
    N/A
    Brake Pull-In Power:
    7 W
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Product Or Component Type:
    servo motor
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Centring Collar Depth:
    2.5 mm
    Datasheet:
    View
    $1,506.98
    Add to Cart Quick view
  • Schneider Electric BMH0703P16F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P16F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key

    Schneider Electric

    $1,759.03
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP54, 16bit encoder, straight, 3 phases
    SKU:
    BMH0703P16F1A
    China Rohs Regulation:
    X
    Speed Feedback Resolution:
    32768 points/turn
    Centring Collar Depth:
    2.5 mm
    Rohs Exemption Information:
    Yes
    Stator Inductance:
    8.6 mH 20 °C
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Holding Torque:
    3 N.m holding brake
    Range Compatibility:
    Lexium 32
    Mounting Support:
    international standard flange
    Product Or Component Type:
    servo motor
    Number Of Motor Stacks:
    3
    Key Width:
    20 mm
    Device Short Name:
    BMH
    Shaft End:
    keyed
    Holding Brake:
    with
    Circle Diameter Of The Mounting Holes:
    82 mm
    Sustainable Offer Status:
    Green Premium product
    Number Of Motor Poles:
    10
    Continuous Stall Current:
    3.91 A
    Centring Collar Diameter:
    60 mm
    Net Weight:
    4 kg
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Motor Flange Size:
    70 mm
    Pvc Free:
    Yes
    Stator Resistance:
    2.65 Ohm 20 °C
    Ip Degree Of Protection:
    IP54 standard
    Rotor Inertia:
    1.78 kg.cm²
    Length:
    225 mm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Phase:
    three phase
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Maximum Permanent Current:
    12.57 A
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Torque Constant:
    0.87 N.m/A 120 °C
    Shaft Diameter:
    14 mm
    Maximum Axial Force Fa:
    0.2 x Fr
    Type Of Cooling:
    natural convection
    Continuous Power:
    1.68 W
    Shaft Length:
    30 mm
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Electrical Connection:
    straight connectors
    Mounting Holes Diameter:
    5.5 mm
    Warranty:
    18 months
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Brake Pull-In Power:
    7 W
    Maximum Mechanical Speed:
    8000 rpm
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Second Shaft:
    without second shaft end
    Number Of Mounting Holes:
    4
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Environmental Disclosure:
    ENVPEP111002EN
    [Us] Rated Supply Voltage:
    480 V
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Mercury Free:
    Yes
    Feedback Type:
    single turn SinCos Hiperface
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Circularity Profile:
    N/A
    Datasheet:
    View
    $1,759.03
    Add to Cart Quick view
  • Schneider Electric BMH0703P12F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P12F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key

    Schneider Electric

    $2,531.09
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP54, 128 multiturn encoder, straight, 3 phases
    SKU:
    BMH0703P12F1A
    Number Of Motor Poles:
    10
    Net Weight:
    4 kg
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Stator Resistance:
    2.65 Ohm 20 °C
    Motor Flange Size:
    70 mm
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Shaft Diameter:
    14 mm
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Key Width:
    20 mm
    Shaft Length:
    30 mm
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Warranty:
    18 months
    [Us] Rated Supply Voltage:
    480 V
    Mounting Support:
    international standard flange
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Mercury Free:
    Yes
    Maximum Permanent Current:
    12.57 A
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Length:
    225 mm
    China Rohs Regulation:
    X
    Environmental Disclosure:
    ENVPEP111002EN
    Speed Feedback Resolution:
    131072 points/turn x 4096 turns
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Type Of Cooling:
    natural convection
    Circle Diameter Of The Mounting Holes:
    82 mm
    Maximum Axial Force Fa:
    0.2 x Fr
    Mounting Holes Diameter:
    5.5 mm
    Feedback Type:
    multiturn SinCos Hiperface
    Rotor Inertia:
    1.78 kg.cm²
    Pvc Free:
    Yes
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Holding Brake:
    with
    Stator Inductance:
    8.6 mH 20 °C
    Brake Pull-In Power:
    7 W
    Device Short Name:
    BMH
    Maximum Mechanical Speed:
    8000 rpm
    Continuous Stall Current:
    3.91 A
    Torque Constant:
    0.87 N.m/A 120 °C
    Product Or Component Type:
    servo motor
    Holding Torque:
    3 N.m holding brake
    Centring Collar Diameter:
    60 mm
    Sustainable Offer Status:
    Green Premium product
    Centring Collar Depth:
    2.5 mm
    Shaft End:
    keyed
    Phase:
    three phase
    Electrical Connection:
    straight connectors
    Second Shaft:
    without second shaft end
    Number Of Motor Stacks:
    3
    Number Of Mounting Holes:
    4
    Continuous Power:
    1.68 W
    Rohs Exemption Information:
    Yes
    Ip Degree Of Protection:
    IP54 standard
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Circularity Profile:
    N/A
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Range Compatibility:
    Lexium 32
    Datasheet:
    View
    $2,531.09
    Add to Cart Quick view
  • Schneider Electric BMH0703P11F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P11F2A Motor 70Mm Iec 3,4Nm Ip54 1320W Key

    Schneider Electric

    $1,427.39
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP54, 128bit encoder, 3 phases
    SKU:
    BMH0703P11F2A
    Number Of Mounting Holes:
    4
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Rotor Inertia:
    1.78 kg.cm²
    Holding Brake:
    with
    Phase:
    three phase
    Second Shaft:
    without second shaft end
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Key Width:
    20 mm
    Centring Collar Depth:
    2.5 mm
    Device Short Name:
    BMH
    Warranty:
    18 months
    Speed Feedback Resolution:
    131072 points/turn
    Maximum Mechanical Speed:
    8000 rpm
    Shaft Length:
    30 mm
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Torque Constant:
    0.87 N.m/A 120 °C
    Feedback Type:
    single turn SinCos Hiperface
    Mercury Free:
    Yes
    Brake Pull-In Power:
    7 W
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Net Weight:
    4 kg
    Continuous Stall Current:
    3.91 A
    Maximum Axial Force Fa:
    0.2 x Fr
    Motor Flange Size:
    70 mm
    China Rohs Regulation:
    X
    Holding Torque:
    3 N.m holding brake
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Environmental Disclosure:
    ENVPEP111002EN
    Length:
    225 mm
    [Us] Rated Supply Voltage:
    480 V
    Pvc Free:
    Yes
    Continuous Power:
    1.68 W
    Stator Resistance:
    2.65 Ohm 20 °C
    Maximum Permanent Current:
    12.57 A
    Sustainable Offer Status:
    Green Premium product
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Circularity Profile:
    N/A
    Product Or Component Type:
    servo motor
    Number Of Motor Poles:
    10
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Range Compatibility:
    Lexium 32
    Rohs Exemption Information:
    Yes
    Electrical Connection:
    rotatable right-angled connectors
    Stator Inductance:
    8.6 mH 20 °C
    Mounting Support:
    international standard flange
    Type Of Cooling:
    natural convection
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Ip Degree Of Protection:
    IP54 standard
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Circle Diameter Of The Mounting Holes:
    82 mm
    Mounting Holes Diameter:
    5.5 mm
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Shaft End:
    keyed
    Number Of Motor Stacks:
    3
    Centring Collar Diameter:
    60 mm
    Shaft Diameter:
    14 mm
    Datasheet:
    View
    $1,427.39
    Add to Cart Quick view
  • Schneider Electric BMH0703P11F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P11F1A Motor 70Mm Iec 3,4Nm Ip54 1320W Key

    Schneider Electric

    $3,139.98
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, keyed shaft, with brake, IP54, 128bit encoder, straight, 3 phases
    SKU:
    BMH0703P11F1A
    Net Weight:
    4 kg
    Warranty:
    18 months
    [Us] Rated Supply Voltage:
    480 V
    Maximum Axial Force Fa:
    0.2 x Fr
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Maximum Permanent Current:
    12.57 A
    China Rohs Regulation:
    X
    Pvc Free:
    Yes
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Shaft End:
    keyed
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Mercury Free:
    Yes
    Electrical Connection:
    straight connectors
    Number Of Motor Poles:
    10
    Ip Degree Of Protection:
    IP54 standard
    Number Of Mounting Holes:
    4
    Number Of Motor Stacks:
    3
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Continuous Stall Current:
    3.91 A
    Holding Brake:
    with
    Key Width:
    20 mm
    Circularity Profile:
    N/A
    Length:
    225 mm
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Rohs Exemption Information:
    Yes
    Device Short Name:
    BMH
    Torque Constant:
    0.87 N.m/A 120 °C
    Continuous Power:
    1.68 W
    Shaft Length:
    30 mm
    Feedback Type:
    single turn SinCos Hiperface
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Phase:
    three phase
    Speed Feedback Resolution:
    131072 points/turn
    Centring Collar Diameter:
    60 mm
    Stator Inductance:
    8.6 mH 20 °C
    Motor Flange Size:
    70 mm
    Rotor Inertia:
    1.78 kg.cm²
    Stator Resistance:
    2.65 Ohm 20 °C
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Sustainable Offer Status:
    Green Premium product
    Range Compatibility:
    Lexium 32
    Shaft Diameter:
    14 mm
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Holding Torque:
    3 N.m holding brake
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Circle Diameter Of The Mounting Holes:
    82 mm
    Centring Collar Depth:
    2.5 mm
    Second Shaft:
    without second shaft end
    Brake Pull-In Power:
    7 W
    Product Or Component Type:
    servo motor
    Type Of Cooling:
    natural convection
    Mounting Holes Diameter:
    5.5 mm
    Mounting Support:
    international standard flange
    Environmental Disclosure:
    ENVPEP111002EN
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Maximum Mechanical Speed:
    8000 rpm
    Datasheet:
    View
    $3,139.98
    Add to Cart Quick view
  • Schneider Electric BMH0703P02F2A Motor 70Mm Iec 3,4Nm Ip54 1320W No Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P02F2A Motor 70Mm Iec 3,4Nm Ip54 1320W No Key

    Schneider Electric

    $1,687.39
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP54, 128 multiturn encoder, 3 phases
    SKU:
    BMH0703P02F2A
    Product Or Component Type:
    servo motor
    Circle Diameter Of The Mounting Holes:
    82 mm
    Stator Inductance:
    8.6 mH 20 °C
    Circularity Profile:
    N/A
    Maximum Permanent Current:
    12.57 A
    Rohs Exemption Information:
    Yes
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Centring Collar Depth:
    2.5 mm
    Number Of Motor Poles:
    10
    Length:
    225 mm
    Mercury Free:
    Yes
    Holding Brake:
    with
    Phase:
    three phase
    Environmental Disclosure:
    ENVPEP111002EN
    Rotor Inertia:
    1.78 kg.cm²
    Brake Pull-In Power:
    7 W
    Warranty:
    18 months
    Continuous Power:
    1.68 W
    Number Of Mounting Holes:
    4
    Net Weight:
    4 kg
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Speed Feedback Resolution:
    131072 points/turn x 4096 turns
    China Rohs Regulation:
    X
    Pvc Free:
    Yes
    Stator Resistance:
    2.65 Ohm 20 °C
    Shaft Length:
    30 mm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Range Compatibility:
    Lexium 32
    Type Of Cooling:
    natural convection
    Maximum Axial Force Fa:
    0.2 x Fr
    Torque Constant:
    0.87 N.m/A 120 °C
    Continuous Stall Current:
    3.91 A
    Feedback Type:
    multiturn SinCos Hiperface
    Motor Flange Size:
    70 mm
    Holding Torque:
    3 N.m holding brake
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Number Of Motor Stacks:
    3
    Mounting Support:
    international standard flange
    Maximum Mechanical Speed:
    8000 rpm
    Second Shaft:
    without second shaft end
    Shaft Diameter:
    14 mm
    Mounting Holes Diameter:
    5.5 mm
    Shaft End:
    smooth shaft
    Centring Collar Diameter:
    60 mm
    Ip Degree Of Protection:
    IP54 standard
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Device Short Name:
    BMH
    Sustainable Offer Status:
    Green Premium product
    Electrical Connection:
    rotatable right-angled connectors
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    [Us] Rated Supply Voltage:
    480 V
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Datasheet:
    View
    $1,687.39
    Add to Cart Quick view
  • Schneider Electric BMH0703P01F2A Motor 70Mm Iec 3,4Nm Ip54 1320W No Key
    Add to Cart
    Quick view

    Schneider Electric BMH0703P01F2A Motor 70Mm Iec 3,4Nm Ip54 1320W No Key

    Schneider Electric

    $1,395.55
    servo motor BMH, Lexium 32, 3.4Nm, 8000rpm, untapped shaft, with brake, IP54, 128bit encoder, 3 phases
    SKU:
    BMH0703P01F2A
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Mounting Holes Diameter:
    5.5 mm
    Holding Torque:
    3 N.m holding brake
    Warranty:
    18 months
    Rohs Exemption Information:
    Yes
    Number Of Motor Poles:
    10
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Number Of Motor Stacks:
    3
    Continuous Stall Torque:
    3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Product Or Component Type:
    servo motor
    Second Shaft:
    without second shaft end
    Phase:
    three phase
    Continuous Power:
    1.68 W
    Ip Degree Of Protection:
    IP54 standard
    Circle Diameter Of The Mounting Holes:
    82 mm
    Continuous Stall Current:
    3.91 A
    Pvc Free:
    Yes
    Centring Collar Diameter:
    60 mm
    Nominal Torque:
    2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
    Motor Flange Size:
    70 mm
    Environmental Disclosure:
    ENVPEP111002EN
    Maximum Current Irms:
    12.6 A LXM32.D18N4
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Feedback Type:
    single turn SinCos Hiperface
    Speed Feedback Resolution:
    131072 points/turn
    Rotor Inertia:
    1.78 kg.cm²
    Maximum Permanent Current:
    12.57 A
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Mounting Support:
    international standard flange
    Back Emf Constant:
    55.8 V/krpm 120 °C
    Number Of Mounting Holes:
    4
    Sustainable Offer Status:
    Green Premium product
    Shaft Diameter:
    14 mm
    Device Short Name:
    BMH
    Nominal Output Power:
    1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
    Mercury Free:
    Yes
    Torque Constant:
    0.87 N.m/A 120 °C
    Product Compatibility:
    LXM32.D18N4 400...480 V three phase
    Brake Pull-In Power:
    7 W
    Maximum Axial Force Fa:
    0.2 x Fr
    Range Compatibility:
    Lexium 32
    Electrical Connection:
    rotatable right-angled connectors
    [Us] Rated Supply Voltage:
    480 V
    Type Of Cooling:
    natural convection
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Centring Collar Depth:
    2.5 mm
    Maximum Mechanical Speed:
    8000 rpm
    Net Weight:
    4 kg
    Stator Resistance:
    2.65 Ohm 20 °C
    Peak Stall Torque:
    10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
    Stator Inductance:
    8.6 mH 20 °C
    Maximum Radial Force Fr:
    730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
    Length:
    225 mm
    China Rohs Regulation:
    X
    Nominal Speed:
    5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
    Shaft End:
    smooth shaft
    Circularity Profile:
    N/A
    Shaft Length:
    30 mm
    Holding Brake:
    with
    Datasheet:
    View
    $1,395.55
    Add to Cart Quick view
  • Schneider Electric BMH0702P11A2A Motor 70Mm Iec 2,5Nm Ip54 1160W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702P11A2A Motor 70Mm Iec 2,5Nm Ip54 1160W Key

    Schneider Electric

    $1,156.76
    This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end without holding brake. It is an equipped with a single-turn SinCos...
    SKU:
    BMH0702P11A2A
    Peak Stall Torque:
    7.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 7.4 N.m LXM32.D12N4 3 A, 480 V, three phase
    Maximum Mechanical Speed:
    8000 rpm
    Key Width:
    18 mm
    Circle Diameter Of The Mounting Holes:
    82 mm
    Environmental Disclosure:
    ENVPEP111002EN
    Maximum Axial Force Fa:
    0.2 x Fr
    Shaft Length:
    23 mm
    Number Of Mounting Holes:
    4
    Ip Degree Of Protection:
    IP54 standard
    China Rohs Regulation:
    X
    Length:
    154 mm
    Phase:
    three phase
    Maximum Permanent Current:
    9.68 A
    Stator Resistance:
    3.8 Ohm 20 °C
    Net Weight:
    2.3 kg
    Shaft Diameter:
    11 mm
    Product Or Component Type:
    servo motor
    Mounting Holes Diameter:
    5.5 mm
    Number Of Motor Stacks:
    2
    [Us] Rated Supply Voltage:
    480 V
    Number Of Motor Poles:
    10
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Centring Collar Diameter:
    60 mm
    Continuous Stall Torque:
    2.5 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.5 N.m LXM32.D12N4 3 A, 480 V, three phase
    Torque Constant:
    0.84 N.m/A 120 °C
    Stator Inductance:
    12.2 mH 20 °C
    Rotor Inertia:
    1.13 kg.cm²
    Centring Collar Depth:
    2.5 mm
    Motor Flange Size:
    70 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Second Shaft:
    without second shaft end
    Maximum Current Irms:
    9.7 A LXM32.D12N4
    Mercury Free:
    Yes
    Holding Brake:
    without
    Speed Feedback Resolution:
    131072 points/turn
    Continuous Stall Current:
    2.94 A
    Product Compatibility:
    LXM32.D12N4 400...480 V three phase
    Device Short Name:
    BMH
    Nominal Speed:
    3000 rpm LXM32.D12N4 3 A, 400 V, three phase || 3000 rpm LXM32.D12N4 3 A, 480 V, three phase
    Feedback Type:
    single turn SinCos Hiperface
    Type Of Cooling:
    natural convection
    Nominal Output Power:
    700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
    Range Compatibility:
    Lexium 32
    Electrical Connection:
    rotatable right-angled connectors
    Shaft End:
    keyed
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Mounting Support:
    international standard flange
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Warranty:
    18 months
    Nominal Torque:
    2.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.2 N.m LXM32.D12N4 3 A, 480 V, three phase
    Back Emf Constant:
    54.08 V/krpm 120 °C
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Circularity Profile:
    N/A
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Pvc Free:
    Yes
    Rohs Exemption Information:
    Yes
    Sustainable Offer Status:
    Green Premium product
    Continuous Power:
    1.51 W
    Datasheet:
    View
    $1,156.76
    Add to Cart Quick view
  • Schneider Electric BMH0702T01A2A Motor 70Mm Iec 2,5Nm Ip54 1160W No Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702T01A2A Motor 70Mm Iec 2,5Nm Ip54 1160W No Key

    Schneider Electric

    $1,124.93
    servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, untapped shaft, without brake, IP54, 128bit encoder
    SKU:
    BMH0702T01A2A
    Shaft End:
    smooth shaft
    Continuous Stall Current:
    5.38 A
    Centring Collar Depth:
    2.5 mm
    Sustainable Offer Status:
    Green Premium product
    Range Compatibility:
    Lexium 32
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Environmental Disclosure:
    ENVPEP111002EN
    Product Compatibility:
    LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
    Length:
    154 mm
    Shaft Length:
    23 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Nominal Speed:
    2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
    Product Or Component Type:
    servo motor
    Mercury Free:
    Yes
    Ip Degree Of Protection:
    IP54 standard
    Peak Stall Torque:
    6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
    Torque Constant:
    0.46 N.m/A 120 °C
    Mounting Support:
    international standard flange
    Phase:
    three phase
    Device Short Name:
    BMH
    [Us] Rated Supply Voltage:
    240 V
    Nominal Output Power:
    600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
    Centring Collar Diameter:
    60 mm
    Motor Flange Size:
    70 mm
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Continuous Stall Torque:
    2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
    Second Shaft:
    without second shaft end
    Warranty:
    18 months
    Nominal Torque:
    2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
    Stator Electrical Time Constant:
    3.1 ms 20 °C
    Continuous Power:
    1.51 W
    Mounting Holes Diameter:
    5.5 mm
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Stator Inductance:
    3.6 mH 20 °C
    Maximum Current Irms:
    15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
    Electrical Connection:
    rotatable right-angled connectors
    Speed Feedback Resolution:
    131072 points/turn
    Circle Diameter Of The Mounting Holes:
    82 mm
    Type Of Cooling:
    natural convection
    Shaft Diameter:
    11 mm
    Feedback Type:
    single turn SinCos Hiperface
    Pvc Free:
    Yes
    Rohs Exemption Information:
    Yes
    Maximum Axial Force Fa:
    0.2 x Fr
    Stator Resistance:
    1.15 Ohm 20 °C
    Number Of Motor Stacks:
    2
    Rotor Inertia:
    1.13 kg.cm²
    Maximum Mechanical Speed:
    8000 rpm
    Net Weight:
    2.3 kg
    Circularity Profile:
    N/A
    Number Of Mounting Holes:
    4
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Maximum Permanent Current:
    17.71 A
    Holding Brake:
    without
    China Rohs Regulation:
    X
    Back Emf Constant:
    29.6 V/krpm 120 °C
    Number Of Motor Poles:
    10
    Datasheet:
    View
    $1,124.93
    Add to Cart Quick view
  • Schneider Electric BMH0702T36A2A Motor 70Mm Iec 2,5Nm Ip65/67 1080W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702T36A2A Motor 70Mm Iec 2,5Nm Ip65/67 1080W Key

    Schneider Electric

    $971.05
    servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, keyed shaft, without brake, IP65, IP67, 16bit encoder
    SKU:
    BMH0702T36A2A
    Stator Inductance:
    3.6 mH 20 °C
    Continuous Stall Torque:
    2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
    Second Shaft:
    without second shaft end
    Number Of Motor Stacks:
    2
    Product Compatibility:
    LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
    Shaft End:
    keyed
    Maximum Axial Force Fa:
    0.2 x Fr
    Type Of Cooling:
    natural convection
    Continuous Power:
    1.51 W
    Rotor Inertia:
    1.13 kg.cm²
    Pvc Free:
    Yes
    Warranty:
    18 months
    Circle Diameter Of The Mounting Holes:
    82 mm
    [Us] Rated Supply Voltage:
    240 V
    Torque Constant:
    0.46 N.m/A 120 °C
    Range Compatibility:
    Lexium 32
    Number Of Mounting Holes:
    4
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Back Emf Constant:
    29.6 V/krpm 120 °C
    Maximum Permanent Current:
    17.71 A
    Environmental Disclosure:
    ENVPEP111002EN
    Speed Feedback Resolution:
    32768 points/turn
    Feedback Type:
    single turn SinCos Hiperface
    Nominal Speed:
    2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
    Shaft Length:
    23 mm
    Device Short Name:
    BMH
    Mounting Support:
    international standard flange
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Continuous Stall Current:
    5.38 A
    Maximum Mechanical Speed:
    8000 rpm
    Length:
    154 mm
    Nominal Output Power:
    600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
    Peak Stall Torque:
    6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
    Phase:
    three phase
    Key Width:
    18 mm
    Holding Brake:
    without
    Shaft Diameter:
    11 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Sustainable Offer Status:
    Green Premium product
    Number Of Motor Poles:
    10
    Product Or Component Type:
    servo motor
    Centring Collar Depth:
    2.5 mm
    Mounting Holes Diameter:
    5.5 mm
    Maximum Current Irms:
    15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
    Net Weight:
    2.3 kg
    China Rohs Regulation:
    X
    Circularity Profile:
    N/A
    Motor Flange Size:
    70 mm
    Stator Resistance:
    1.15 Ohm 20 °C
    Rohs Exemption Information:
    Yes
    Centring Collar Diameter:
    60 mm
    Nominal Torque:
    2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
    Electrical Connection:
    rotatable right-angled connectors
    Mercury Free:
    Yes
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Ip Degree Of Protection:
    IP65 standard || IP67 with IP67 kit
    Stator Electrical Time Constant:
    3.1 ms 20 °C
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Datasheet:
    View
    $971.05
    Add to Cart Quick view
  • Schneider Electric BMH0702P12A2A Motor 70Mm Iec 2,5Nm Ip54 1160W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702P12A2A Motor 70Mm Iec 2,5Nm Ip54 1160W Key

    Schneider Electric

    $1,448.61
    This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end without holding brake. It is an equipped with a multi-turn SinCos...
    SKU:
    BMH0702P12A2A
    Key Width:
    18 mm
    Shaft Length:
    23 mm
    Length:
    154 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Circle Diameter Of The Mounting Holes:
    82 mm
    Mercury Free:
    Yes
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Ip Degree Of Protection:
    IP54 standard
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Warranty:
    18 months
    Rotor Inertia:
    1.13 kg.cm²
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Mounting Holes Diameter:
    5.5 mm
    Pvc Free:
    Yes
    Second Shaft:
    without second shaft end
    Nominal Torque:
    2.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.2 N.m LXM32.D12N4 3 A, 480 V, three phase
    Motor Flange Size:
    70 mm
    Centring Collar Depth:
    2.5 mm
    Feedback Type:
    multiturn SinCos Hiperface
    Device Short Name:
    BMH
    Torque Constant:
    0.84 N.m/A 120 °C
    Range Compatibility:
    Lexium 32
    China Rohs Regulation:
    X
    Nominal Speed:
    3000 rpm LXM32.D12N4 3 A, 400 V, three phase || 3000 rpm LXM32.D12N4 3 A, 480 V, three phase
    Continuous Power:
    1.51 W
    Holding Brake:
    without
    Maximum Axial Force Fa:
    0.2 x Fr
    Product Or Component Type:
    servo motor
    Shaft Diameter:
    11 mm
    Speed Feedback Resolution:
    131072 points/turn x 4096 turns
    Stator Resistance:
    3.8 Ohm 20 °C
    Peak Stall Torque:
    7.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 7.4 N.m LXM32.D12N4 3 A, 480 V, three phase
    Shaft End:
    keyed
    Maximum Mechanical Speed:
    8000 rpm
    Stator Inductance:
    12.2 mH 20 °C
    Centring Collar Diameter:
    60 mm
    Electrical Connection:
    rotatable right-angled connectors
    Nominal Output Power:
    700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
    Type Of Cooling:
    natural convection
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Number Of Motor Poles:
    10
    Continuous Stall Torque:
    2.5 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.5 N.m LXM32.D12N4 3 A, 480 V, three phase
    [Us] Rated Supply Voltage:
    480 V
    Mounting Support:
    international standard flange
    Number Of Motor Stacks:
    2
    Product Compatibility:
    LXM32.D12N4 400...480 V three phase
    Net Weight:
    2.3 kg
    Maximum Current Irms:
    9.7 A LXM32.D12N4
    Circularity Profile:
    N/A
    Environmental Disclosure:
    ENVPEP111002EN
    Continuous Stall Current:
    2.94 A
    Number Of Mounting Holes:
    4
    Stator Electrical Time Constant:
    3.2 ms 20 °C
    Phase:
    three phase
    Maximum Permanent Current:
    9.68 A
    Rohs Exemption Information:
    Yes
    Back Emf Constant:
    54.08 V/krpm 120 °C
    Sustainable Offer Status:
    Green Premium product
    Datasheet:
    View
    $1,448.61
    Add to Cart Quick view
  • Schneider Electric BMH0702T17A2A Motor 70Mm Iec 2,5Nm Ip54 1080W Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702T17A2A Motor 70Mm Iec 2,5Nm Ip54 1080W Key

    Schneider Electric

    $1,854.54
    servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, keyed shaft, without brake, IP54, 16 multiturn encoder
    SKU:
    BMH0702T17A2A
    Back Emf Constant:
    29.6 V/krpm 120 °C
    Device Short Name:
    BMH
    Maximum Mechanical Speed:
    8000 rpm
    Electrical Connection:
    rotatable right-angled connectors
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Second Shaft:
    without second shaft end
    Number Of Motor Stacks:
    2
    Maximum Current Irms:
    15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
    Product Or Component Type:
    servo motor
    Mercury Free:
    Yes
    Holding Brake:
    without
    Rotor Inertia:
    1.13 kg.cm²
    Nominal Torque:
    2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
    Continuous Stall Torque:
    2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
    Peak Stall Torque:
    6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
    Key Width:
    18 mm
    Circle Diameter Of The Mounting Holes:
    82 mm
    Range Compatibility:
    Lexium 32
    Length:
    154 mm
    Feedback Type:
    multiturn SinCos Hiperface
    Rohs Exemption Information:
    Yes
    Continuous Power:
    1.51 W
    Nominal Output Power:
    600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
    Speed Feedback Resolution:
    32768 points/turn x 4096 turns
    Maximum Permanent Current:
    17.71 A
    Motor Flange Size:
    70 mm
    Stator Resistance:
    1.15 Ohm 20 °C
    Warranty:
    18 months
    Mounting Support:
    international standard flange
    Nominal Speed:
    2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
    Type Of Cooling:
    natural convection
    Mounting Holes Diameter:
    5.5 mm
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Sustainable Offer Status:
    Green Premium product
    Product Compatibility:
    LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
    Net Weight:
    2.3 kg
    Phase:
    three phase
    Shaft Length:
    23 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Number Of Mounting Holes:
    4
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    China Rohs Regulation:
    X
    Number Of Motor Poles:
    10
    Stator Inductance:
    3.6 mH 20 °C
    Centring Collar Depth:
    2.5 mm
    Circularity Profile:
    N/A
    [Us] Rated Supply Voltage:
    240 V
    Continuous Stall Current:
    5.38 A
    Shaft End:
    keyed
    Ip Degree Of Protection:
    IP54 standard
    Stator Electrical Time Constant:
    3.1 ms 20 °C
    Torque Constant:
    0.46 N.m/A 120 °C
    Maximum Axial Force Fa:
    0.2 x Fr
    Pvc Free:
    Yes
    Centring Collar Diameter:
    60 mm
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Environmental Disclosure:
    ENVPEP111002EN
    Shaft Diameter:
    11 mm
    Datasheet:
    View
    $1,854.54
    Add to Cart Quick view
  • Schneider Electric BMH0702T07A2A Motor 70Mm Iec 2,5Nm Ip54 1080W No Key
    Add to Cart
    Quick view

    Schneider Electric BMH0702T07A2A Motor 70Mm Iec 2,5Nm Ip54 1080W No Key

    Schneider Electric

    $1,204.53
    servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, untapped shaft, without brake, IP54, 16 multiturn encoder
    SKU:
    BMH0702T07A2A
    California Proposition 65:
    WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
    Net Weight:
    2.3 kg
    Range Compatibility:
    Lexium 32
    Phase:
    three phase
    Nominal Speed:
    2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
    Stator Inductance:
    3.6 mH 20 °C
    [Us] Rated Supply Voltage:
    240 V
    Device Short Name:
    BMH
    Sustainable Offer Status:
    Green Premium product
    China Rohs Regulation:
    X
    Ip Degree Of Protection:
    IP54 standard
    Shaft End:
    smooth shaft
    Continuous Power:
    1.51 W
    Product Or Component Type:
    servo motor
    Shaft Length:
    23 mm
    Number Of Motor Poles:
    10
    Product Compatibility:
    LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
    Maximum Permanent Current:
    17.71 A
    Circularity Profile:
    N/A
    Eu Rohs Directive:
    Pro-active compliance (Product out of EU RoHS legal scope)
    Centring Collar Depth:
    2.5 mm
    Warranty:
    18 months
    Feedback Type:
    multiturn SinCos Hiperface
    Number Of Mounting Holes:
    4
    Second Shaft:
    without second shaft end
    Nominal Output Power:
    600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
    Torque Constant:
    0.46 N.m/A 120 °C
    Stator Resistance:
    1.15 Ohm 20 °C
    Nominal Torque:
    2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
    Maximum Mechanical Speed:
    8000 rpm
    Peak Stall Torque:
    6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
    Rotor Inertia:
    1.13 kg.cm²
    Centring Collar Diameter:
    60 mm
    Electrical Connection:
    rotatable right-angled connectors
    Continuous Stall Current:
    5.38 A
    Maximum Radial Force Fr:
    710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
    Motor Flange Size:
    70 mm
    Mercury Free:
    Yes
    Weee:
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
    Maximum Current Irms:
    15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
    Stator Electrical Time Constant:
    3.1 ms 20 °C
    Rohs Exemption Information:
    Yes
    Mounting Support:
    international standard flange
    Continuous Stall Torque:
    2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
    Circle Diameter Of The Mounting Holes:
    82 mm
    Shaft Diameter:
    11 mm
    Reach Regulation:
    Reference contains Substances of Very High Concern above the threshold
    Speed Feedback Resolution:
    32768 points/turn x 4096 turns
    Environmental Disclosure:
    ENVPEP111002EN
    Length:
    154 mm
    Mounting Holes Diameter:
    5.5 mm
    Pvc Free:
    Yes
    Number Of Motor Stacks:
    2
    Holding Brake:
    without
    Type Of Cooling:
    natural convection
    Maximum Axial Force Fa:
    0.2 x Fr
    Back Emf Constant:
    29.6 V/krpm 120 °C
    Datasheet:
    View
    $1,204.53
    Add to Cart Quick view