Switched-mode power supply; Compact; 1-phase; 12 VDC output voltage; 5 A output current; DC-OK LED.
The WAGO EPSITRON Compact series switch-mode AC/DC power supply unit (SMPS PSU) provides a 12Vdc (SELV) output at 5A with a total power of 60W. It supports a wide input voltage range of 85-264Vac or 125-375Vdc, suitable for single-phase AC or DC applications. The unit features Push-in CAGE CLAMP spring connections and can be mounted on a DIN-35 rail or on a wall using screws, with a compact width of 72mm. It is rated for an ambient temperature range of -25°C to +70°C and has an IP20 protection rating, equivalent to model 7871211.
- conformity marking:
- CE
- connection technology:
- Push-in CAGE CLAMP
- connection type 1:
- Input/output
- control deviation:
- ¤ 1 %
- country of origin sales organisation germany:
- CN
- default setting:
- DC 12 V
- depth:
- 56 mm / 2.205 inch
- depth from upper edge of din rail:
- 52.5 mm / 2.067 inch
- derating:
- 3 %/K (> +45 C and Ue = 90 VAC): 2.3 %/K (> +50 C and Ue = 230 VAC)
- deviation dynamic load change 10 90:
- ¤ 1 %
- discharge current:
- ¤ 0.25 mA
- efficiency typ:
- 88.5 % (230 VAC: Nominal load): 87.5 % (110 VAC: Nominal load)
- fine stranded conductor:
- 0.2 2.5 mm / 24 12 AWG
- fire load:
- 0.000 MJ
- flammability class per ul94:
- V0
- height:
- 90 mm / 3.543 inch
- input current ii:
- ¤ 0.6 A
- input voltage derating:
- -2 %/V (< 100 VAC): -1.33 %/V (< 140 VDC)
- input voltage range:
- AC 85 264 V: DC 125 375 V
- inrush current:
- ¤ 30 A (NTC)
- internal fuse:
- T 3.15 A / 250 VAC
- isolation voltage pri gnd:
- DC 2.12 kV
- isolation voltage pri sec:
- DC 4.242 kV
- mains failure hold up time:
- 600 ms (230 VAC): 12 ms (110 VAC)
- mounting type:
- DIN-35 rail || Screw mount (back/side)
- mtbf:
- > 500,000 h (per IEC 61709)
- nominal input voltage ui nom:
- 1 x AC 100 240 V: DC 140 340 V
- nominal mains frequency range:
- 47 63 Hz: 0 Hz
- nominal output current io nom:
- 0.208333333333333
- nominal output power:
- 60 W
- nominal output voltage uo nom:
- DC 12 V (SELV)
- note dimensions:
- Depth: 48 mm (without cover)
- open circuit proof:
- Yes
- operation status indicator:
- Green LED (Uo)
- output voltage range:
- DC 10 14 V (adjustable)
- overload behavior:
- Constant power (in overload range: 1.22 1.7 x Io nom): Hiccup in the event of a short circuit or permanent overload
- overvoltage category:
- II
- overvoltage protection secondary:
- ¤ 20 VDC (in the event of a fault)
- packaging type:
- Box
- parallel operation:
- Yes, for devices of the same type
- phases:
- 1
- pollution degree:
- 2
- power factor:
- 0.5
- power factor correction pfc:
- Passive
- power loss max pl max:
- 9 W (100 VAC / 12 VDC: 2.5 A)
- power loss pl:
- ¤ 0.6 W (230 VAC: No load)
- protection class:
- I
- protection type:
- IP20 (per EN 60529)
- recommended backup fusing:
- Circuit breaker: 6 A, 10 A or higher: Tripping characteristic: B
- relative humidity:
- 20 90 % (no condensation permissible)
- required backup fusing:
- An external DC fuse is required for the DC input voltage.
- residual ripple:
- ¤ 100 mV (Peak-to-peak)
- resistance to reverse feed:
- ¤ DC 16 V
- reverse voltage protection:
- Yes
- series operation:
- Yes, for 2 devices of the same type
- short circuit protected:
- Yes
- signaling:
- 1 x LED DC OK (green)
- solid conductor:
- 0.2 2.5 mm / 24 12 AWG
- standards specifications:
- EN 61204-3 || EN 60335-1 || EN 62368-1 || UL 60950-1 || UL 508
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation:
- -25 70 C
- surrounding air temperature storage:
- -40 85 C
- transient suppression primary:
- Varistor
- wago connector:
- picoMAX 5.0, WAGO 2092 Series
- weight:
- 63.000 g
- width:
- 72 mm / 2.835 inch
