Schneider Electric 8911DPSG42V02 Starter, Definite Purpose, nonreversing, 40A, 2 pole, 1 phase, 120VAC coil, melting alloy overload, NEMA 1, +options
Schneider Electric
$460.74
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric 8911DPSG42V02 Starter, Definite Purpose, nonreversing, 40A, 2 pole, 1 phase, 120VAC coil, melting alloy overload, NEMA 1, +options
8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. This two pole definite purpose starter has a full load rating of 40 amperes. This starter has ratings of 3 HP at 115 VAC and 7.5 HP at 230 VAC single phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The starter has straight through wiring. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this definite purpose starter. Enclosure is 10.00 inches tall, 6.00 inches wide and 5.56 inches deep. Auxiliary contacts are available for these starters. 8911DPS definite purpose starters are UL component recognized.
- Poles Description:
- 2P
- Country of Origin:
- Mexico
- Warranty:
- 18 months
- Product Or Component Type:
- Definite Purpose Starter
- [Uc] Control Circuit Voltage:
- 110 V AC 50 Hz || 120 V AC 60 Hz
- Phase:
- 1 phase
- Thermal Overload Type:
- melting alloy
- Range Of Product:
- DPS
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Mercury Free:
- Yes
- [Ue] Rated Operational Voltage:
- 600 V AC
- Locked Rotor Rated Current:
- 240 A 230 V AC || 200 A 460 V AC || 160 A 575 V AC
- Eu Rohs Directive:
- Compliant with Exemptions
- Number Of Thermal Units Required:
- 1
- Nema Degree Of Protection:
- NEMA 1
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Enclosure Material:
- painted sheet steel
- Maximum Horse Power Rating:
- 3-3 hp 115 V AC, 1 phase || 7.5-7.5 hp 230 V AC, 1 phase
- Line Rated Current:
- 40 A
- Rohs Exemption Information:
- Yes
