Schneider Electric

Schneider Electric HGP36015 Circuit breaker, PowerPacT H, 15A, 3 pole, 600VAC, 18kA, lugs, thermal magnetic, 80%

(No reviews yet) Write a Review
SKU:
HGP36015
MPN:
HGP36015
Condition:
New
Communication Interface:
Modbus || Ethernet
Poles Description:
3P
Local Signaling:
switched off (OFF) 1 trip indicator green)
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Magnetic Tripping Current:
750-750 A
Quality Labels:
CE
Mounting Support:
lug
Suitability For Isolation:
yes IEC 60947-2
Wire Stripping Length:
16 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Circuit Breaker Application:
HACR rated
Length:
16 mm
Breaking Capacity Code:
G
Ambient Air Temperature For Storage:
-50-85°C
Product Or Component Type:
circuit breaker
Ambient Air Temperature For Operation:
-25-70°C
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Continuous Current Rating:
0.8
Network Frequency:
50/60 Hz
Product Certifications:
UL || CSA || NOM
Electrical Connection:
terminal nut, line || lugs, load
Utilisation Category:
category A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Protected Poles Description:
3t
Eu Rohs Directive:
Compliant
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Sustainable Offer Status:
Green Premium product
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Control Type:
toggle
Quantity Per Set:
1
Depth:
86 mm
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Range:
PowerPact
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Pvc Free:
Yes
Mercury Free:
Yes
Magnetic Hold Current:
350 A
Weight:
2.2 kg
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Mounting Mode:
unit mount lug)
Pollution Degree:
3 IEC 60947-1
Device Application:
distribution
Trip Unit Technology:
thermal-magnetic
Circularity Profile:
ENVEOLI1311006EN
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
$2,239.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has terminal nuts on the line side and lugs on the load side. This PowerPacT H, 15A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose