Schneider Electric SH31001P12F2200 servo motor SH3 100 2,94Nm,key,multi,brake,90°conn.IP65/IP67,6k RPM
SKU:
SH31001P12F2200
UPC:
MPN:
SH31001P12F2200
Condition:
New
Mounting Holes Diameter:
9.0 mm
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Shaft Length:
40 mm
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
China Rohs Regulation:
X
Device Short Name:
SH3.....P
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Stall Current:
3.5 A
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
Range Compatibility:
PacDrive 3
Centring Collar Diameter:
95 mm
Shaft End:
parallel key
Circle Diameter Of The Mounting Holes:
115 mm
Holding Torque:
9 N.m
Mounting Support:
international standard flange
Stator Resistance:
3.8 Ohm
Maximum Mechanical Speed:
6000 rpm
Rohs Exemption Information:
Yes
Key Width:
6 mm
Torque Constant:
0.84 N.m/A 120°C
Rotor Inertia:
2.018 kg.cm²
Width:
6 mm
Speed Feedback Resolution:
128 periods
Phase:
three phase
Number Of Mounting Holes:
4
Encoder Type:
absolute multiturn SinCos Hiperface
Type Of Cooling:
natural convection
Product Or Component Type:
servo motor
Back Emf Constant:
60 V/krpm 20°C
[Us] Rated Supply Voltage:
115...480 V
Stator Inductance:
27.15 mH
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Warranty:
18 months
Shaft Diameter:
19 mm
Circularity Profile:
N/A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Holding Brake:
with
Mercury Free:
Yes
Weight:
4.8 kg
Centring Collar Depth:
3.5 mm
Motor Flange Size:
100 mm
Environmental Disclosure:
ENVPEP111049EN
Electrical Connection:
straight connector
Continuous Power:
1190 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
