Schneider Electric

Schneider Electric XPSMCMDO0016C1G expansion module, Modicon MCM, 16 DO, SIL1, spring

(No reviews yet) Write a Review
SKU:
XPSMCMDO0016C1G
MPN:
XPSMCMDO0016C1G
Condition:
New
Output Load:
60 Ohm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Insulation:
250 V AC between power supply and housing IEC 61800-5-1
Country of Origin:
Italy
Quality Labels:
CE
Connections - Terminals:
2 spring clamp terminals, removable terminal block
Discrete Input Type:
isolated
China Rohs Regulation:
X
Load Type:
resistive load
Product Certifications:
RCM || cULus || TÃœV
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electrical Connection:
spring terminal
Power Dissipation In W:
3 W
Range Of Product:
Preventa Safety automation
Shock Resistance:
10 gn 16 ms) 1000 shocks on each axis IEC 61496-1
Mounting Support:
omega 35 mm DIN rail EN 50022
Safety Level:
can reach category 1 ISO 13849-1 || can reach PL = c ISO 13849-1 || can reach SIL 1 IEC 61508 || SILCL 1 IEC 62061
Safety Reliability Data:
DC > 60 % || MTTFd = 772 years high || PFHd = 6.61E-9 1/h
Relative Humidity:
10-95 %
Device Short Name:
XPSMCM
Standards:
IEC 61508 || IEC 61800-5-1 || ISO 13849-1 || IEC 62061
Reach Free Of Svhc:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Cable Cross Section:
0.2-2.5 mm² - AWG 24...AWG 14 flexible without cable end || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, without bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, with bezel || 0.2-2.5 mm² - AWG 24...AWG 14 solid with ca
Weight:
0.25 kg
Vibration Resistance:
+/-0.35 mm 10-55 Hz)IEC 61496-1
Number Of Terminal Blocks:
6
Ip Degree Of Protection:
IP20 enclosure)
Product Or Component Type:
safe output expansion module
Group Of Channels:
16 single channel
Net Weight:
0.25 kg
[Us] Rated Supply Voltage:
24 V - 20...20 % DC
Ambient Air Temperature For Storage:
-20-85°C
Overvoltage Category:
II
Integrated Connection Type:
backplane expansion bus
Local Signaling:
1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 16 LEDs green/red OUT output status
Ambient Air Temperature For Operation:
-10-55°C
Discrete Output Current:
100 mA
Rohs Exemption Information:
Yes
Number Of Outputs:
16 configurable diagnostic connection
Power Consumption In W:
3 W
Function Of Module:
monitoring safety actuators discrete output
[Uimp] Rated Impulse Withstand Voltage:
4 kV IEC 61800-5-1
Discrete Output Type:
DC
Mercury Free:
Yes
Reach Regulation:
Free of Substances of Very High Concern above the threshold
$433.55

Description

This Modicon MCM safe output expansion module has 16 digital outputs SIL 1/PL c, and is fitted with captive spring clamp terminals. It is designed to monitor remotely your safe I/O. It is furnished with spring clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable output activation and de-activation delays, independent control of pairs of outputs, and configurable diagnostic output signals. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.145kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÃœV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.
View AllClose

Related Products

Related Products