Schneider Electric

Schneider Electric ASILUFC5 Asi Module Communication

(No reviews yet) Write a Review
SKU:
ASILUFC5
UPC:
3389110365801
Condition:
New
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Ip Degree Of Protection:
IP20 conforming to IEC 60529
Warranty:
18 months
Mounting Mode:
plug-in
Bus Type:
AS-Interface
Connection Pitch:
3.81 mm output || 5.08 mm input
Device Application:
communication
Connections - Terminals:
input screw clamp terminals 1 0.2-1.5 mm²flexible without cable end || input screw clamp terminals 1 0.2-1.5 mm²rigid without cable end || input screw clamp terminals 1 0.25-1.5 mm²flexible with cable end || input screw clamp terminals 2 0.2-1 mmÂ
California Proposition 65:
WARNING: Cancer - www.P65Warnings.ca.gov
Range Compatibility:
TeSys TeSys Ultra LUB non reversing power base || TeSys TeSys Ultra LU2B reversing power base
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Communication Port Protocol:
Profibus DP
Device Short Name:
ASILUF
Eu Rohs Directive:
Compliant with Exemptions
Range:
TeSys
Mounting Location:
front side
Current Consumption:
200 mA 24 V output || 25 mA normal operation || 30 mA fault operation
Local Signalling:
2 LEDs front panel
Addressing:
31 slaves
Product Compatibility:
LUCA || LUCL || LUCD || LUCM || LUCC || LUCB
Function Available:
AS-Interface communication module
Switching Current Capacity:
500 mA 24 V against short-circuits solid state
Tightening Torque:
input 0.5-0.6 N.m 3.5 mm || output 0.2-0.25 N.m 2.5 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
Product Or Component Type:
communication module
Rohs Exemption Information:
Yes
Catalog:
View
Datasheet:
View
$188.00

Description

TeSys U communication module for AS-Interface bus, to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a yellow 2-point plug-in connector for connection to an AS-I network (limited to 31 slaves), a black 2-point plug-in connector for connection to an external 24V DC supply. On front side, a 3-point plug-in terminal block is provided for the local control of the starter controller, to be associated with a control terminal block LU9BN11C for a LUB base or LU9MRC for a LU2B base. It displays 2 LEDs indicating 24V voltage presence (PWR) and communication status (FAULT). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
View AllClose

Related Products

Related Products