Schneider Electric

Schneider Electric MA4IMA24H Surge protection module, Surgelogic, MA, 240kA, 480Y/277VAC, 3 phase, 4 wire, SPD type 2, HRG

(No reviews yet) Write a Review
SKU:
MA4IMA24H
MPN:
MA4IMA24H
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Local Signaling:
status LED green normal operation
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Nominal Discharge Current:
20 kA
Accessory / Separate Part Category:
replacement part
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Depth:
68.3 mm
Circularity Profile:
ENVEOLI2002011EN
Range Of Product:
Surgelogic
Nema Degree Of Protection:
NEMA 2
Phase:
3 phase
Provided Equipment:
alarm enable/disable switch
Surge Current:
240 kA per phase
Country of Origin:
United States
Device Short Name:
IMA || HRG
[Ue] Rated Operational Voltage:
480Y/277 V AC
Standards:
UL 1449:ed. 4 || UL 1283:ed. 5 || CSA C22.2 No 8:1986 || ANSI/IEEE C62.41 || ANSI/IEEE C62.45 || NEC 285
Enclosure Material:
Black Plastic
Mercury Free:
Yes
Short-Circuit Protection:
200 kA
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Compliant with Exemptions
Mounting Support:
panel mounting
Warranty:
18 months
Product Or Component Type:
surge protection module
Connections - Terminals:
terminals
Wiring Configuration:
4-wire
Environmental Disclosure:
ENVPEP2002011EN
Ambient Air Temperature For Operation:
65-65°C
[Uc] Maximum Continuous Operating Voltage:
320 V
$975.00

Description

Surgelogic™ EMA replacement modules surge protective devices are apart of modular brick parallel device. The EBA device has multi-stage suppression circuits consisting of field-proven, fast-acting metal oxide varistors (MOVs). These systems provide suppression, enchanced EFI/RFI filtering for all critical modes inside electrical equipment, and shorter lead lengths with superior SPD performance. This surge protection device is 3 phase, 3-wire + ground, 480Y/277 V, 240 kA surge current per phase, and short circuit current rating of 200 kA. They provide better performance with a diagnostic interface with push to test switches, red and green status LEDs, module status LEDs per mode, dry contacts, audible alarm with disable switch, and a surge counter. The device is engineered to UL 489 11th Edition, type 2 SPD and complies with UL 96A 12th Edition Master Label for Lightning Protection Systems.
View AllClose

Related Products

Related Products