Schneider Electric SH31402P01A2100 servo motor SH3 140 19,5Nm,nokey,single,nobrake,90°conn.IP65/IP65,4k RPM
SKU:
SH31402P01A2100
UPC:
MPN:
SH31402P01A2100
Condition:
New
Continuous Stall Current:
13.2 A
Shaft Diameter:
24 mm
Nominal Torque:
18.6 N.m 115 V single phase || 17.1 N.m 230 V single phase || 12.3 N.m 400 V three phase || 9.7 N.m 480 V three phase
Product Or Component Type:
servo motor
Continuous Stall Torque:
19.5 N.m 115...480 V three phase
Circularity Profile:
N/A
Speed Feedback Resolution:
128 periods
China Rohs Regulation:
X
Maximum Current Irms:
44.1 A
Centring Collar Depth:
3.5 mm
Net Weight:
16.6 kg
Phase:
three phase
Shaft End:
smooth shaft
Stator Inductance:
11.225 mH
Back Emf Constant:
101 V/krpm 20°C
Stator Resistance:
0.6 Ohm
Mounting Support:
international standard flange
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Mechanical Speed:
4000 rpm
Encoder Type:
absolute single turn SinCos Hiperface
Shaft Length:
50 mm
Motor Flange Size:
140 mm
Nominal Output Power:
1460 W 115 V single phase || 2690 W 230 V single phase || 3860 W 400 V three phase || 3660 W 480 V three phase
Type Of Cooling:
natural convection
Circle Diameter Of The Mounting Holes:
165 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Connection:
rotatable right angled connector
Maximum Radial Force Fr:
2240 N 1000 rpm || 1780 N 2000 rpm || 1550 N 3000 rpm
[Us] Rated Supply Voltage:
115...480 V
Device Short Name:
SH3.....P
Centring Collar Diameter:
130 mm
Range Compatibility:
PacDrive 3
Pvc Free:
Yes
Country of Origin:
United States
Warranty:
18 months
Continuous Power:
3900 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Weight:
16.6 kg
Mounting Holes Diameter:
11 mm
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Rotor Inertia:
12.68 kg.cm²
Mercury Free:
Yes
Sustainable Offer Status:
Green Premium product
Length:
272.5 mm
Maximum Axial Force Fa:
300 N
Number Of Mounting Holes:
4
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
